:orphan:

.. title:: SERIAL_HAS_DRIVER

.. option:: CONFIG_SERIAL_HAS_DRIVER

*(No prompt -- not directly user assignable.)*

Type: ``bool``

Help
====

This is an option to be enabled by individual serial driver
to signal that there is a serial driver. This is being used
by other drivers which are dependent on serial.

Direct dependencies
===================

\ :option:`SERIAL <CONFIG_SERIAL>`

*(Includes any dependencies from ifs and menus.)*

Defaults
========

No defaults. Implicitly defaults to ``n``.

Symbols that select this symbol
===============================

- \ :option:`UART_NS16550 <CONFIG_UART_NS16550>`
- \ :option:`UART_MCUX <CONFIG_UART_MCUX>`
- \ :option:`UART_MCUX_FLEXCOMM <CONFIG_UART_MCUX_FLEXCOMM>`
- \ :option:`UART_MCUX_IUART <CONFIG_UART_MCUX_IUART>`
- \ :option:`UART_MCUX_LPSCI <CONFIG_UART_MCUX_LPSCI>`
- \ :option:`UART_MCUX_LPUART <CONFIG_UART_MCUX_LPUART>`
- \ :option:`UART_MIV <CONFIG_UART_MIV>`
- \ :option:`UART_IMX <CONFIG_UART_IMX>`
- \ :option:`UART_STELLARIS <CONFIG_UART_STELLARIS>`
- \ :option:`UART_NATIVE_POSIX <CONFIG_UART_NATIVE_POSIX>`
- \ :option:`USART_SAM <CONFIG_USART_SAM>`
- \ :option:`UART_SAM <CONFIG_UART_SAM>`
- \ :option:`UART_STM32 <CONFIG_UART_STM32>`
- \ :option:`UART_NRFX <CONFIG_UART_NRFX>`
- \ :option:`UART_ALTERA_JTAG <CONFIG_UART_ALTERA_JTAG>`
- \ :option:`UART_CC13XX_CC26XX <CONFIG_UART_CC13XX_CC26XX>`
- \ :option:`UART_CC32XX <CONFIG_UART_CC32XX>`
- \ :option:`UART_CMSDK_APB <CONFIG_UART_CMSDK_APB>`
- \ :option:`UART_SIFIVE <CONFIG_UART_SIFIVE>`
- \ :option:`UART_ESP32 <CONFIG_UART_ESP32>`
- \ :option:`UART_GECKO <CONFIG_UART_GECKO>`
- \ :option:`LEUART_GECKO <CONFIG_LEUART_GECKO>`
- \ :option:`UART_MSP432P4XX <CONFIG_UART_MSP432P4XX>`
- \ :option:`UART_NUVOTON <CONFIG_UART_NUVOTON>`
- \ :option:`UART_SAM0 <CONFIG_UART_SAM0>`
- \ :option:`UART_PSOC6 <CONFIG_UART_PSOC6>`
- \ :option:`UART_PL011 <CONFIG_UART_PL011>`
- \ :option:`UART_RV32M1_LPUART <CONFIG_UART_RV32M1_LPUART>`
- \ :option:`UART_LITEUART <CONFIG_UART_LITEUART>`
- \ :option:`UART_RTT_0 <CONFIG_UART_RTT_0>`
- \ :option:`UART_RTT_1 <CONFIG_UART_RTT_1>`
- \ :option:`UART_RTT_2 <CONFIG_UART_RTT_2>`
- \ :option:`UART_RTT_3 <CONFIG_UART_RTT_3>`
- \ :option:`UART_XLNX_PS <CONFIG_UART_XLNX_PS>`
- \ :option:`UART_XLNX_UARTLITE <CONFIG_UART_XLNX_UARTLITE>`
- \ :option:`UART_XMC4XXX <CONFIG_UART_XMC4XXX>`
- \ :option:`UART_LPC11U6X <CONFIG_UART_LPC11U6X>`
- \ :option:`UART_NPCX <CONFIG_UART_NPCX>`
- \ :option:`UART_APBUART <CONFIG_UART_APBUART>`
- \ :option:`USB_CDC_ACM <CONFIG_USB_CDC_ACM>`

Kconfig definition
==================

.. highlight:: kconfig

At ``drivers/serial/Kconfig:15``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:32`` → ``drivers/Kconfig:24``

Menu path: (Top) → Device Drivers → Serial Drivers

.. parsed-literal::

    config SERIAL_HAS_DRIVER
    	bool
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>`
    	help
    	  This is an option to be enabled by individual serial driver
    	  to signal that there is a serial driver. This is being used
    	  by other drivers which are dependent on serial.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*