:orphan: .. title:: BOARD_INIT_PRIORITY .. option:: CONFIG_BOARD_INIT_PRIORITY *Board initialization priority* Type: ``int`` Help ==== Board initialization priority. The board initialization must take place after the GPIO driver is initialized. Help ==== Board initialization priority. This must be bigger than GPIO_GECKO_COMMON_INIT_PRIORITY. Help ==== Board initialization priority. This must be bigger than GPIO_GECKO_COMMON_INIT_PRIORITY. Help ==== Board initialization priority. This must be bigger than GPIO_GECKO_COMMON_INIT_PRIORITY. Help ==== Board initialization priority. This must be bigger than GPIO_GECKO_COMMON_INIT_PRIORITY. Help ==== Board initialization priority. This must be bigger than GPIO_GECKO_COMMON_INIT_PRIORITY. Help ==== Board initialization priority. This must be bigger than GPIO_GECKO_COMMON_INIT_PRIORITY. Help ==== Board initialization priority. This must be bigger than GPIO_GECKO_COMMON_INIT_PRIORITY. Help ==== Board initialization priority. Defaults ======== - 50 - \ :option:`KERNEL_INIT_PRIORITY_DEFAULT ` - \ :option:`KERNEL_INIT_PRIORITY_DEFAULT ` - \ :option:`KERNEL_INIT_PRIORITY_DEFAULT ` - \ :option:`KERNEL_INIT_PRIORITY_DEFAULT ` - \ :option:`KERNEL_INIT_PRIORITY_DEFAULT ` - \ :option:`KERNEL_INIT_PRIORITY_DEFAULT ` - \ :option:`KERNEL_INIT_PRIORITY_DEFAULT ` - \ :option:`KERNEL_INIT_PRIORITY_DEFAULT ` Kconfig definitions =================== .. highlight:: kconfig At ``boards/arm/arty/Kconfig:6`` Included via ``Kconfig:8`` → ``Kconfig.zephyr:27`` → ``boards/Kconfig:57`` Menu path: (Top) → Board Options .. parsed-literal:: config BOARD_INIT_PRIORITY int "Board initialization priority" default 50 depends on n help Board initialization priority. The board initialization must take place after the GPIO driver is initialized. ---- At ``boards/arm/efm32gg_stk3701a/Kconfig:6`` Included via ``Kconfig:8`` → ``Kconfig.zephyr:27`` → ``boards/Kconfig:57`` Menu path: (Top) → Board Options .. parsed-literal:: config BOARD_INIT_PRIORITY int default \ :option:`KERNEL_INIT_PRIORITY_DEFAULT ` depends on \ :option:`BOARD_EFM32GG_STK3701A ` && \ :option:`GPIO ` help Board initialization priority. This must be bigger than GPIO_GECKO_COMMON_INIT_PRIORITY. ---- At ``boards/arm/efm32hg_slstk3400a/Kconfig:7`` Included via ``Kconfig:8`` → ``Kconfig.zephyr:27`` → ``boards/Kconfig:57`` Menu path: (Top) → Board Options .. parsed-literal:: config BOARD_INIT_PRIORITY int default \ :option:`KERNEL_INIT_PRIORITY_DEFAULT ` depends on \ :option:`BOARD_EFM32HG_SLSTK3400A ` && \ :option:`GPIO ` help Board initialization priority. This must be bigger than GPIO_GECKO_COMMON_INIT_PRIORITY. ---- At ``boards/arm/efm32pg_stk3401a/Kconfig:6`` Included via ``Kconfig:8`` → ``Kconfig.zephyr:27`` → ``boards/Kconfig:57`` Menu path: (Top) → Board Options .. parsed-literal:: config BOARD_INIT_PRIORITY int default \ :option:`KERNEL_INIT_PRIORITY_DEFAULT ` depends on \ :option:`BOARD_EFM32PG_STK3401A ` && \ :option:`GPIO ` help Board initialization priority. This must be bigger than GPIO_GECKO_COMMON_INIT_PRIORITY. ---- At ``boards/arm/efm32pg_stk3402a/Kconfig:6`` Included via ``Kconfig:8`` → ``Kconfig.zephyr:27`` → ``boards/Kconfig:57`` Menu path: (Top) → Board Options .. parsed-literal:: config BOARD_INIT_PRIORITY int default \ :option:`KERNEL_INIT_PRIORITY_DEFAULT ` depends on (\ :option:`BOARD_EFM32PG_STK3402A ` || \ :option:`BOARD_EFM32PG_STK3402A_JG `) && \ :option:`GPIO ` help Board initialization priority. This must be bigger than GPIO_GECKO_COMMON_INIT_PRIORITY. ---- At ``boards/arm/efm32wg_stk3800/Kconfig:6`` Included via ``Kconfig:8`` → ``Kconfig.zephyr:27`` → ``boards/Kconfig:57`` Menu path: (Top) → Board Options .. parsed-literal:: config BOARD_INIT_PRIORITY int default \ :option:`KERNEL_INIT_PRIORITY_DEFAULT ` depends on \ :option:`BOARD_EFM32WG_STK3800 ` && \ :option:`GPIO ` help Board initialization priority. This must be bigger than GPIO_GECKO_COMMON_INIT_PRIORITY. ---- At ``boards/arm/efr32_radio/Kconfig:9`` Included via ``Kconfig:8`` → ``Kconfig.zephyr:27`` → ``boards/Kconfig:57`` Menu path: (Top) → Board Options .. parsed-literal:: config BOARD_INIT_PRIORITY int default \ :option:`KERNEL_INIT_PRIORITY_DEFAULT ` depends on \ :option:`BOARD_EFR32_RADIO ` help Board initialization priority. This must be bigger than GPIO_GECKO_COMMON_INIT_PRIORITY. ---- At ``boards/arm/efr32mg_sltb004a/Kconfig:6`` Included via ``Kconfig:8`` → ``Kconfig.zephyr:27`` → ``boards/Kconfig:57`` Menu path: (Top) → Board Options .. parsed-literal:: config BOARD_INIT_PRIORITY int default \ :option:`KERNEL_INIT_PRIORITY_DEFAULT ` depends on \ :option:`BOARD_EFR32MG_SLTB004A ` help Board initialization priority. This must be bigger than GPIO_GECKO_COMMON_INIT_PRIORITY. ---- At ``boards/arm/quick_feather/Kconfig:6`` Included via ``Kconfig:8`` → ``Kconfig.zephyr:27`` → ``boards/Kconfig:57`` Menu path: (Top) → Board Options .. parsed-literal:: config BOARD_INIT_PRIORITY int default \ :option:`KERNEL_INIT_PRIORITY_DEFAULT ` help Board initialization priority. *(The 'depends on' condition includes propagated dependencies from ifs and menus.)*