:orphan:

.. title:: FLASH_BASE_ADDRESS

.. option:: CONFIG_FLASH_BASE_ADDRESS

*Flash Base Address*

Type: ``hex``

Help
====

This option specifies the base address of the flash on the board. It is
normally set by the board's defconfig file and the user should generally
avoid modifying it via the menu configuration.

Direct dependencies
===================

(!\ :option:`XIP <CONFIG_XIP>` && \ :option:`BOARD_96B_MEERKAT96 <CONFIG_BOARD_96B_MEERKAT96>`) || (!\ :option:`XIP <CONFIG_XIP>` && \ :option:`BOARD_COLIBRI_IMX7D_M4 <CONFIG_BOARD_COLIBRI_IMX7D_M4>`) || \ :option:`BOARD_MERCURY_XU <CONFIG_BOARD_MERCURY_XU>` || (!\ :option:`XIP <CONFIG_XIP>` && \ :option:`BOARD_MIMX8MM_EVK <CONFIG_BOARD_MIMX8MM_EVK>`) || (!\ :option:`XIP <CONFIG_XIP>` && \ :option:`BOARD_PICO_PI_M4 <CONFIG_BOARD_PICO_PI_M4>`) || (!\ :option:`XIP <CONFIG_XIP>` && \ :option:`BOARD_WARP7_M4 <CONFIG_BOARD_WARP7_M4>`) || \ :option:`BOARD_HIFIVE1_REVB <CONFIG_BOARD_HIFIVE1_REVB>` || (\ :option:`CODE_SEMC <CONFIG_CODE_SEMC>` && \ :option:`SOC_SERIES_IMX_RT <CONFIG_SOC_SERIES_IMX_RT>`) || (\ :option:`CODE_ITCM <CONFIG_CODE_ITCM>` && \ :option:`SOC_SERIES_IMX_RT <CONFIG_SOC_SERIES_IMX_RT>`) || (\ :option:`CODE_FLEXSPI <CONFIG_CODE_FLEXSPI>` && \ :option:`SOC_SERIES_IMX_RT <CONFIG_SOC_SERIES_IMX_RT>`) || (\ :option:`CODE_FLEXSPI2 <CONFIG_CODE_FLEXSPI2>` && \ :option:`SOC_SERIES_IMX_RT <CONFIG_SOC_SERIES_IMX_RT>`) || \ :option:`SOC_QEMU_CORTEX_A53 <CONFIG_SOC_QEMU_CORTEX_A53>` || (!\ :option:`XIP <CONFIG_XIP>` && \ :option:`SOC_CC3220SF <CONFIG_SOC_CC3220SF>` && \ :option:`SOC_SERIES_CC32XX <CONFIG_SOC_SERIES_CC32XX>`) || (!\ :option:`XIP <CONFIG_XIP>` && \ :option:`SOC_CC3235SF <CONFIG_SOC_CC3235SF>` && \ :option:`SOC_SERIES_CC32XX <CONFIG_SOC_SERIES_CC32XX>`) || \ :option:`SOC_XILINX_ZYNQMP <CONFIG_SOC_XILINX_ZYNQMP>` || (\ :option:`FLASH <CONFIG_FLASH>` && \ :option:`SOC_OPENISA_RV32M1_RISCV32 <CONFIG_SOC_OPENISA_RV32M1_RISCV32>`) || \ :option:`ARC <CONFIG_ARC>` || \ :option:`ARM <CONFIG_ARM>` || \ :option:`NIOS2 <CONFIG_NIOS2>` || \ :option:`X86 <CONFIG_X86>`

*(Includes any dependencies from ifs and menus.)*

Defaults
========

- 0
- 0
- 0x08000000
- 0
- 0
- 0
- 0x0
- 0x0
- 0x0
- 0x0
- 0x0
- 0x0
- 0
- 0
- 0x0
- 0x0
- 0x0 if (\ :option:`XIP <CONFIG_XIP>` && \ :option:`ARM <CONFIG_ARM>`) || !\ :option:`ARM <CONFIG_ARM>`

Kconfig definitions
===================

.. highlight:: kconfig

At ``boards/arm/96b_meerkat96/Kconfig.defconfig:14``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. parsed-literal::

    config FLASH_BASE_ADDRESS
    	hex
    	default 0
    	depends on !\ :option:`XIP <CONFIG_XIP>` && \ :option:`BOARD_96B_MEERKAT96 <CONFIG_BOARD_96B_MEERKAT96>`

----

At ``boards/arm/colibri_imx7d_m4/Kconfig.defconfig:14``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. parsed-literal::

    config FLASH_BASE_ADDRESS
    	hex
    	default 0
    	depends on !\ :option:`XIP <CONFIG_XIP>` && \ :option:`BOARD_COLIBRI_IMX7D_M4 <CONFIG_BOARD_COLIBRI_IMX7D_M4>`

----

At ``boards/arm/mercury_xu/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. parsed-literal::

    config FLASH_BASE_ADDRESS
    	hex
    	default 0x08000000
    	depends on \ :option:`BOARD_MERCURY_XU <CONFIG_BOARD_MERCURY_XU>`

----

At ``boards/arm/mimx8mm_evk/Kconfig.defconfig:14``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. parsed-literal::

    config FLASH_BASE_ADDRESS
    	hex
    	default 0
    	depends on !\ :option:`XIP <CONFIG_XIP>` && \ :option:`BOARD_MIMX8MM_EVK <CONFIG_BOARD_MIMX8MM_EVK>`

----

At ``boards/arm/pico_pi_m4/Kconfig.defconfig:14``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. parsed-literal::

    config FLASH_BASE_ADDRESS
    	hex
    	default 0
    	depends on !\ :option:`XIP <CONFIG_XIP>` && \ :option:`BOARD_PICO_PI_M4 <CONFIG_BOARD_PICO_PI_M4>`

----

At ``boards/arm/warp7_m4/Kconfig.defconfig:22``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. parsed-literal::

    config FLASH_BASE_ADDRESS
    	hex
    	default 0
    	depends on !\ :option:`XIP <CONFIG_XIP>` && \ :option:`BOARD_WARP7_M4 <CONFIG_BOARD_WARP7_M4>`

----

At ``boards/riscv/hifive1_revb/Kconfig.defconfig:12``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. parsed-literal::

    config FLASH_BASE_ADDRESS
    	hex
    	default 0x0
    	depends on \ :option:`BOARD_HIFIVE1_REVB <CONFIG_BOARD_HIFIVE1_REVB>`

----

At ``soc/arm/nxp_imx/rt/Kconfig.defconfig.series:74``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/nxp_imx/Kconfig.defconfig:4``

Menu path: (Top)

.. parsed-literal::

    config FLASH_BASE_ADDRESS
    	hex
    	default 0x0
    	depends on \ :option:`CODE_SEMC <CONFIG_CODE_SEMC>` && \ :option:`SOC_SERIES_IMX_RT <CONFIG_SOC_SERIES_IMX_RT>`

----

At ``soc/arm/nxp_imx/rt/Kconfig.defconfig.series:84``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/nxp_imx/Kconfig.defconfig:4``

Menu path: (Top)

.. parsed-literal::

    config FLASH_BASE_ADDRESS
    	hex
    	default 0x0
    	depends on \ :option:`CODE_ITCM <CONFIG_CODE_ITCM>` && \ :option:`SOC_SERIES_IMX_RT <CONFIG_SOC_SERIES_IMX_RT>`

----

At ``soc/arm/nxp_imx/rt/Kconfig.defconfig.series:94``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/nxp_imx/Kconfig.defconfig:4``

Menu path: (Top)

.. parsed-literal::

    config FLASH_BASE_ADDRESS
    	hex
    	default 0x0
    	depends on \ :option:`CODE_FLEXSPI <CONFIG_CODE_FLEXSPI>` && \ :option:`SOC_SERIES_IMX_RT <CONFIG_SOC_SERIES_IMX_RT>`

----

At ``soc/arm/nxp_imx/rt/Kconfig.defconfig.series:104``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/nxp_imx/Kconfig.defconfig:4``

Menu path: (Top)

.. parsed-literal::

    config FLASH_BASE_ADDRESS
    	hex
    	default 0x0
    	depends on \ :option:`CODE_FLEXSPI2 <CONFIG_CODE_FLEXSPI2>` && \ :option:`SOC_SERIES_IMX_RT <CONFIG_SOC_SERIES_IMX_RT>`

----

At ``soc/arm/qemu_cortex_a53/Kconfig.defconfig:23``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1``

Menu path: (Top)

.. parsed-literal::

    config FLASH_BASE_ADDRESS
    	hex
    	default 0x0
    	depends on \ :option:`SOC_QEMU_CORTEX_A53 <CONFIG_SOC_QEMU_CORTEX_A53>`

----

At ``soc/arm/ti_simplelink/cc32xx/Kconfig.defconfig.cc3220sf:36``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/ti_simplelink/Kconfig.defconfig:3`` → ``soc/arm/ti_simplelink/cc32xx/Kconfig.defconfig.series:7``

Menu path: (Top)

.. parsed-literal::

    config FLASH_BASE_ADDRESS
    	hex
    	default 0
    	depends on !\ :option:`XIP <CONFIG_XIP>` && \ :option:`SOC_CC3220SF <CONFIG_SOC_CC3220SF>` && \ :option:`SOC_SERIES_CC32XX <CONFIG_SOC_SERIES_CC32XX>`

----

At ``soc/arm/ti_simplelink/cc32xx/Kconfig.defconfig.cc3235sf:37``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/ti_simplelink/Kconfig.defconfig:3`` → ``soc/arm/ti_simplelink/cc32xx/Kconfig.defconfig.series:7``

Menu path: (Top)

.. parsed-literal::

    config FLASH_BASE_ADDRESS
    	hex
    	default 0
    	depends on !\ :option:`XIP <CONFIG_XIP>` && \ :option:`SOC_CC3235SF <CONFIG_SOC_CC3235SF>` && \ :option:`SOC_SERIES_CC32XX <CONFIG_SOC_SERIES_CC32XX>`

----

At ``soc/arm/xilinx_zynqmp/Kconfig.defconfig:28``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1``

Menu path: (Top)

.. parsed-literal::

    config FLASH_BASE_ADDRESS
    	hex
    	default 0x0
    	depends on \ :option:`SOC_XILINX_ZYNQMP <CONFIG_SOC_XILINX_ZYNQMP>`

----

At ``soc/riscv/openisa_rv32m1/Kconfig.defconfig:156``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1``

Menu path: (Top)

.. parsed-literal::

    config FLASH_BASE_ADDRESS
    	hex
    	default 0x0
    	depends on \ :option:`FLASH <CONFIG_FLASH>` && \ :option:`SOC_OPENISA_RV32M1_RISCV32 <CONFIG_SOC_OPENISA_RV32M1_RISCV32>`

----

At ``arch/Kconfig:176``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:29``

Menu path: (Top) → General Architecture Options

.. parsed-literal::

    config FLASH_BASE_ADDRESS
    	hex "Flash Base Address"
    	default 0x0 if (\ :option:`XIP <CONFIG_XIP>` && \ :option:`ARM <CONFIG_ARM>`) || !\ :option:`ARM <CONFIG_ARM>`
    	depends on \ :option:`ARC <CONFIG_ARC>` || \ :option:`ARM <CONFIG_ARM>` || \ :option:`NIOS2 <CONFIG_NIOS2>` || \ :option:`X86 <CONFIG_X86>`
    	help
    	  This option specifies the base address of the flash on the board. It is
    	  normally set by the board's defconfig file and the user should generally
    	  avoid modifying it via the menu configuration.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*