:orphan:

.. title:: FLASH_SIZE

.. option:: CONFIG_FLASH_SIZE

*Flash Size in kB*

Type: ``int``

Help
====

This option specifies the size of the flash in kB.  It is normally set by
the board's defconfig file and the user should generally avoid modifying
it via the menu configuration.

Direct dependencies
===================

(!\ :option:`XIP <CONFIG_XIP>` && \ :option:`BOARD_96B_MEERKAT96 <CONFIG_BOARD_96B_MEERKAT96>`) || (!\ :option:`XIP <CONFIG_XIP>` && \ :option:`BOARD_COLIBRI_IMX7D_M4 <CONFIG_BOARD_COLIBRI_IMX7D_M4>`) || \ :option:`BOARD_MERCURY_XU <CONFIG_BOARD_MERCURY_XU>` || (!\ :option:`XIP <CONFIG_XIP>` && \ :option:`BOARD_MIMX8MM_EVK <CONFIG_BOARD_MIMX8MM_EVK>`) || (!\ :option:`XIP <CONFIG_XIP>` && \ :option:`BOARD_PICO_PI_M4 <CONFIG_BOARD_PICO_PI_M4>`) || (!\ :option:`XIP <CONFIG_XIP>` && \ :option:`BOARD_WARP7_M4 <CONFIG_BOARD_WARP7_M4>`) || (\ :option:`CODE_SEMC <CONFIG_CODE_SEMC>` && \ :option:`SOC_SERIES_IMX_RT <CONFIG_SOC_SERIES_IMX_RT>`) || (\ :option:`CODE_ITCM <CONFIG_CODE_ITCM>` && \ :option:`SOC_SERIES_IMX_RT <CONFIG_SOC_SERIES_IMX_RT>`) || (\ :option:`CODE_FLEXSPI <CONFIG_CODE_FLEXSPI>` && \ :option:`SOC_SERIES_IMX_RT <CONFIG_SOC_SERIES_IMX_RT>`) || (\ :option:`CODE_FLEXSPI2 <CONFIG_CODE_FLEXSPI2>` && \ :option:`SOC_SERIES_IMX_RT <CONFIG_SOC_SERIES_IMX_RT>`) || \ :option:`SOC_QEMU_CORTEX_A53 <CONFIG_SOC_QEMU_CORTEX_A53>` || (!\ :option:`XIP <CONFIG_XIP>` && \ :option:`SOC_CC3220SF <CONFIG_SOC_CC3220SF>` && \ :option:`SOC_SERIES_CC32XX <CONFIG_SOC_SERIES_CC32XX>`) || (!\ :option:`XIP <CONFIG_XIP>` && \ :option:`SOC_CC3235SF <CONFIG_SOC_CC3235SF>` && \ :option:`SOC_SERIES_CC32XX <CONFIG_SOC_SERIES_CC32XX>`) || \ :option:`SOC_XILINX_ZYNQMP <CONFIG_SOC_XILINX_ZYNQMP>` || \ :option:`ARC <CONFIG_ARC>` || \ :option:`ARM <CONFIG_ARM>` || \ :option:`NIOS2 <CONFIG_NIOS2>` || \ :option:`X86 <CONFIG_X86>`

*(Includes any dependencies from ifs and menus.)*

Defaults
========

- 0
- 0
- 64
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0 if (\ :option:`XIP <CONFIG_XIP>` && \ :option:`ARM <CONFIG_ARM>`) || !\ :option:`ARM <CONFIG_ARM>`

Kconfig definitions
===================

.. highlight:: kconfig

At ``boards/arm/96b_meerkat96/Kconfig.defconfig:12``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. parsed-literal::

    config FLASH_SIZE
    	int
    	default 0
    	depends on !\ :option:`XIP <CONFIG_XIP>` && \ :option:`BOARD_96B_MEERKAT96 <CONFIG_BOARD_96B_MEERKAT96>`

----

At ``boards/arm/colibri_imx7d_m4/Kconfig.defconfig:12``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. parsed-literal::

    config FLASH_SIZE
    	int
    	default 0
    	depends on !\ :option:`XIP <CONFIG_XIP>` && \ :option:`BOARD_COLIBRI_IMX7D_M4 <CONFIG_BOARD_COLIBRI_IMX7D_M4>`

----

At ``boards/arm/mercury_xu/Kconfig.defconfig:9``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. parsed-literal::

    config FLASH_SIZE
    	int
    	default 64
    	depends on \ :option:`BOARD_MERCURY_XU <CONFIG_BOARD_MERCURY_XU>`

----

At ``boards/arm/mimx8mm_evk/Kconfig.defconfig:12``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. parsed-literal::

    config FLASH_SIZE
    	int
    	default 0
    	depends on !\ :option:`XIP <CONFIG_XIP>` && \ :option:`BOARD_MIMX8MM_EVK <CONFIG_BOARD_MIMX8MM_EVK>`

----

At ``boards/arm/pico_pi_m4/Kconfig.defconfig:12``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. parsed-literal::

    config FLASH_SIZE
    	int
    	default 0
    	depends on !\ :option:`XIP <CONFIG_XIP>` && \ :option:`BOARD_PICO_PI_M4 <CONFIG_BOARD_PICO_PI_M4>`

----

At ``boards/arm/warp7_m4/Kconfig.defconfig:20``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. parsed-literal::

    config FLASH_SIZE
    	int
    	default 0
    	depends on !\ :option:`XIP <CONFIG_XIP>` && \ :option:`BOARD_WARP7_M4 <CONFIG_BOARD_WARP7_M4>`

----

At ``soc/arm/nxp_imx/rt/Kconfig.defconfig.series:71``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/nxp_imx/Kconfig.defconfig:4``

Menu path: (Top)

.. parsed-literal::

    config FLASH_SIZE
    	int
    	default 0
    	depends on \ :option:`CODE_SEMC <CONFIG_CODE_SEMC>` && \ :option:`SOC_SERIES_IMX_RT <CONFIG_SOC_SERIES_IMX_RT>`

----

At ``soc/arm/nxp_imx/rt/Kconfig.defconfig.series:81``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/nxp_imx/Kconfig.defconfig:4``

Menu path: (Top)

.. parsed-literal::

    config FLASH_SIZE
    	int
    	default 0
    	depends on \ :option:`CODE_ITCM <CONFIG_CODE_ITCM>` && \ :option:`SOC_SERIES_IMX_RT <CONFIG_SOC_SERIES_IMX_RT>`

----

At ``soc/arm/nxp_imx/rt/Kconfig.defconfig.series:91``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/nxp_imx/Kconfig.defconfig:4``

Menu path: (Top)

.. parsed-literal::

    config FLASH_SIZE
    	int
    	default 0
    	depends on \ :option:`CODE_FLEXSPI <CONFIG_CODE_FLEXSPI>` && \ :option:`SOC_SERIES_IMX_RT <CONFIG_SOC_SERIES_IMX_RT>`

----

At ``soc/arm/nxp_imx/rt/Kconfig.defconfig.series:101``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/nxp_imx/Kconfig.defconfig:4``

Menu path: (Top)

.. parsed-literal::

    config FLASH_SIZE
    	int
    	default 0
    	depends on \ :option:`CODE_FLEXSPI2 <CONFIG_CODE_FLEXSPI2>` && \ :option:`SOC_SERIES_IMX_RT <CONFIG_SOC_SERIES_IMX_RT>`

----

At ``soc/arm/qemu_cortex_a53/Kconfig.defconfig:20``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1``

Menu path: (Top)

.. parsed-literal::

    config FLASH_SIZE
    	int
    	default 0
    	depends on \ :option:`SOC_QEMU_CORTEX_A53 <CONFIG_SOC_QEMU_CORTEX_A53>`

----

At ``soc/arm/ti_simplelink/cc32xx/Kconfig.defconfig.cc3220sf:34``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/ti_simplelink/Kconfig.defconfig:3`` → ``soc/arm/ti_simplelink/cc32xx/Kconfig.defconfig.series:7``

Menu path: (Top)

.. parsed-literal::

    config FLASH_SIZE
    	int
    	default 0
    	depends on !\ :option:`XIP <CONFIG_XIP>` && \ :option:`SOC_CC3220SF <CONFIG_SOC_CC3220SF>` && \ :option:`SOC_SERIES_CC32XX <CONFIG_SOC_SERIES_CC32XX>`

----

At ``soc/arm/ti_simplelink/cc32xx/Kconfig.defconfig.cc3235sf:35``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/ti_simplelink/Kconfig.defconfig:3`` → ``soc/arm/ti_simplelink/cc32xx/Kconfig.defconfig.series:7``

Menu path: (Top)

.. parsed-literal::

    config FLASH_SIZE
    	int
    	default 0
    	depends on !\ :option:`XIP <CONFIG_XIP>` && \ :option:`SOC_CC3235SF <CONFIG_SOC_CC3235SF>` && \ :option:`SOC_SERIES_CC32XX <CONFIG_SOC_SERIES_CC32XX>`

----

At ``soc/arm/xilinx_zynqmp/Kconfig.defconfig:25``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1``

Menu path: (Top)

.. parsed-literal::

    config FLASH_SIZE
    	int
    	default 0
    	depends on \ :option:`SOC_XILINX_ZYNQMP <CONFIG_SOC_XILINX_ZYNQMP>`

----

At ``arch/Kconfig:168``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:29``

Menu path: (Top) → General Architecture Options

.. parsed-literal::

    config FLASH_SIZE
    	int "Flash Size in kB"
    	default 0 if (\ :option:`XIP <CONFIG_XIP>` && \ :option:`ARM <CONFIG_ARM>`) || !\ :option:`ARM <CONFIG_ARM>`
    	depends on \ :option:`ARC <CONFIG_ARC>` || \ :option:`ARM <CONFIG_ARM>` || \ :option:`NIOS2 <CONFIG_NIOS2>` || \ :option:`X86 <CONFIG_X86>`
    	help
    	  This option specifies the size of the flash in kB.  It is normally set by
    	  the board's defconfig file and the user should generally avoid modifying
    	  it via the menu configuration.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*