:orphan:

.. title:: I2S_SAM_SSC_0_PIN_RK_EN

.. option:: CONFIG_I2S_SAM_SSC_0_PIN_RK_EN

*RK pin enabled*

Type: ``bool``

Help
====

If enabled RK signal is connected to RK pin. It will be configured as
an output or an input depending on whether the receiver is working
in master or slave mode.

If disabled RK signal is disconnected from RK pin and connected
internally to TK (Transmitter Clock signal).

Direct dependencies
===================

\ :option:`I2S_SAM_SSC <CONFIG_I2S_SAM_SSC>` && \ :option:`I2S <CONFIG_I2S>`

*(Includes any dependencies from ifs and menus.)*

Default
=======

- y

Kconfig definition
==================

.. highlight:: kconfig

At ``drivers/i2s/Kconfig.sam_ssc:35``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:32`` → ``drivers/Kconfig:42`` → ``drivers/i2s/Kconfig:28``

Menu path: (Top) → Device Drivers → I2S bus drivers → Atmel SAM MCU family I2S (SSC) Bus Driver

.. parsed-literal::

    config I2S_SAM_SSC_0_PIN_RK_EN
    	bool "RK pin enabled"
    	default y
    	depends on \ :option:`I2S_SAM_SSC <CONFIG_I2S_SAM_SSC>` && \ :option:`I2S <CONFIG_I2S>`
    	help
    	  If enabled RK signal is connected to RK pin. It will be configured as
    	  an output or an input depending on whether the receiver is working
    	  in master or slave mode.
	  
    	  If disabled RK signal is disconnected from RK pin and connected
    	  internally to TK (Transmitter Clock signal).

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*