:orphan:

.. title:: IEEE802154_RF2XX

.. option:: CONFIG_IEEE802154_RF2XX

*ATMEL RF2XX Driver support*

Type: ``bool``

Direct dependencies
===================

(\ :option:`IEEE802154 <CONFIG_IEEE802154>` && \ :option:`NETWORKING <CONFIG_NETWORKING>` && (\ :option:`SHIELD_ATMEL_RF2XX <CONFIG_SHIELD_ATMEL_RF2XX>` || \ :option:`SHIELD_ATMEL_RF2XX_ARDUINO <CONFIG_SHIELD_ATMEL_RF2XX_ARDUINO>` || \ :option:`SHIELD_ATMEL_RF2XX_MIKROBUS <CONFIG_SHIELD_ATMEL_RF2XX_MIKROBUS>` || \ :option:`SHIELD_ATMEL_RF2XX_XPRO <CONFIG_SHIELD_ATMEL_RF2XX_XPRO>` || \ :option:`SHIELD_ATMEL_RF2XX_LEGACY <CONFIG_SHIELD_ATMEL_RF2XX_LEGACY>` || \ :option:`SHIELD_ATMEL_RF2XX_XPLAINED <CONFIG_SHIELD_ATMEL_RF2XX_XPLAINED>`)) || \ :option:`BOARD_ATSAMR21_XPRO <CONFIG_BOARD_ATSAMR21_XPRO>` || (\ :option:`IEEE802154 <CONFIG_IEEE802154>` && \ :option:`NETWORKING <CONFIG_NETWORKING>` && (\ :option:`SHIELD_ATMEL_RF2XX <CONFIG_SHIELD_ATMEL_RF2XX>` || \ :option:`SHIELD_ATMEL_RF2XX_ARDUINO <CONFIG_SHIELD_ATMEL_RF2XX_ARDUINO>` || \ :option:`SHIELD_ATMEL_RF2XX_MIKROBUS <CONFIG_SHIELD_ATMEL_RF2XX_MIKROBUS>` || \ :option:`SHIELD_ATMEL_RF2XX_XPRO <CONFIG_SHIELD_ATMEL_RF2XX_XPRO>` || \ :option:`SHIELD_ATMEL_RF2XX_LEGACY <CONFIG_SHIELD_ATMEL_RF2XX_LEGACY>` || \ :option:`SHIELD_ATMEL_RF2XX_XPLAINED <CONFIG_SHIELD_ATMEL_RF2XX_XPLAINED>`)) || (\ :option:`NETWORKING <CONFIG_NETWORKING>` && \ :option:`IEEE802154 <CONFIG_IEEE802154>`)

*(Includes any dependencies from ifs and menus.)*

Defaults
========

- y
- \ :option:`IEEE802154 <CONFIG_IEEE802154>`
- y

Symbols selected by this symbol
===============================

- \ :option:`SPI <CONFIG_SPI>`
- \ :option:`GPIO <CONFIG_GPIO>`
- \ :option:`NET_L2_IEEE802154_SUB_GHZ <CONFIG_NET_L2_IEEE802154_SUB_GHZ>` if \ :option:`NET_L2_IEEE802154 <CONFIG_NET_L2_IEEE802154>`

Kconfig definitions
===================

.. highlight:: kconfig

At ``boards/shields/atmel_rf2xx/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:17`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.shield.defconfig:1``

Menu path: (Top)

.. parsed-literal::

    config IEEE802154_RF2XX
    	bool
    	default y
    	depends on \ :option:`IEEE802154 <CONFIG_IEEE802154>` && \ :option:`NETWORKING <CONFIG_NETWORKING>` && (\ :option:`SHIELD_ATMEL_RF2XX <CONFIG_SHIELD_ATMEL_RF2XX>` || \ :option:`SHIELD_ATMEL_RF2XX_ARDUINO <CONFIG_SHIELD_ATMEL_RF2XX_ARDUINO>` || \ :option:`SHIELD_ATMEL_RF2XX_MIKROBUS <CONFIG_SHIELD_ATMEL_RF2XX_MIKROBUS>` || \ :option:`SHIELD_ATMEL_RF2XX_XPRO <CONFIG_SHIELD_ATMEL_RF2XX_XPRO>` || \ :option:`SHIELD_ATMEL_RF2XX_LEGACY <CONFIG_SHIELD_ATMEL_RF2XX_LEGACY>` || \ :option:`SHIELD_ATMEL_RF2XX_XPLAINED <CONFIG_SHIELD_ATMEL_RF2XX_XPLAINED>`)

----

At ``boards/arm/atsamr21_xpro/Kconfig.defconfig:11``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. parsed-literal::

    config IEEE802154_RF2XX
    	bool
    	default \ :option:`IEEE802154 <CONFIG_IEEE802154>`
    	depends on \ :option:`BOARD_ATSAMR21_XPRO <CONFIG_BOARD_ATSAMR21_XPRO>`

----

At ``boards/shields/atmel_rf2xx/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. parsed-literal::

    config IEEE802154_RF2XX
    	bool
    	default y
    	depends on \ :option:`IEEE802154 <CONFIG_IEEE802154>` && \ :option:`NETWORKING <CONFIG_NETWORKING>` && (\ :option:`SHIELD_ATMEL_RF2XX <CONFIG_SHIELD_ATMEL_RF2XX>` || \ :option:`SHIELD_ATMEL_RF2XX_ARDUINO <CONFIG_SHIELD_ATMEL_RF2XX_ARDUINO>` || \ :option:`SHIELD_ATMEL_RF2XX_MIKROBUS <CONFIG_SHIELD_ATMEL_RF2XX_MIKROBUS>` || \ :option:`SHIELD_ATMEL_RF2XX_XPRO <CONFIG_SHIELD_ATMEL_RF2XX_XPRO>` || \ :option:`SHIELD_ATMEL_RF2XX_LEGACY <CONFIG_SHIELD_ATMEL_RF2XX_LEGACY>` || \ :option:`SHIELD_ATMEL_RF2XX_XPLAINED <CONFIG_SHIELD_ATMEL_RF2XX_XPLAINED>`)

----

At ``drivers/ieee802154/Kconfig.rf2xx:6``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:32`` → ``drivers/Kconfig:10`` → ``drivers/ieee802154/Kconfig:72``

Menu path: (Top) → Device Drivers → IEEE 802.15.4 drivers options

.. parsed-literal::

    menuconfig IEEE802154_RF2XX
    	bool "ATMEL RF2XX Driver support"
    	select \ :option:`SPI <CONFIG_SPI>`
    	select \ :option:`GPIO <CONFIG_GPIO>`
    	select \ :option:`NET_L2_IEEE802154_SUB_GHZ <CONFIG_NET_L2_IEEE802154_SUB_GHZ>` if \ :option:`NET_L2_IEEE802154 <CONFIG_NET_L2_IEEE802154>`
    	depends on \ :option:`NETWORKING <CONFIG_NETWORKING>` && \ :option:`IEEE802154 <CONFIG_IEEE802154>`

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*