:orphan:

.. title:: LIS2DW12_PULSE_THSY

.. option:: CONFIG_LIS2DW12_PULSE_THSY

*Pulse Y-axis threshold*

Type: ``hex``

Help
====

Threshold to start the pulse-event detection procedure on the Y-axis.
Threshold values for each axis are unsigned 5-bit corresponding
to an 2g acceleration full-scale range.

Direct dependencies
===================

\ :option:`LIS2DW12_PULSE <CONFIG_LIS2DW12_PULSE>` && \ :option:`LIS2DW12_TRIGGER <CONFIG_LIS2DW12_TRIGGER>` && \ :option:`LIS2DW12 <CONFIG_LIS2DW12>` && \ :option:`SENSOR <CONFIG_SENSOR>`

*(Includes any dependencies from ifs and menus.)*

Default
=======

- 0x0E

Kconfig definition
==================

.. highlight:: kconfig

At ``drivers/sensor/lis2dw12/Kconfig:97``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:32`` → ``drivers/Kconfig:62`` → ``drivers/sensor/Kconfig:115``

Menu path: (Top) → Device Drivers → Sensor Drivers → LIS2DW12 I2C/SPI accelerometer sensor driver → Pulse detection

.. parsed-literal::

    config LIS2DW12_PULSE_THSY
    	hex "Pulse Y-axis threshold"
    	range 0 0x1F
    	default 0x0E
    	depends on \ :option:`LIS2DW12_PULSE <CONFIG_LIS2DW12_PULSE>` && \ :option:`LIS2DW12_TRIGGER <CONFIG_LIS2DW12_TRIGGER>` && \ :option:`LIS2DW12 <CONFIG_LIS2DW12>` && \ :option:`SENSOR <CONFIG_SENSOR>`
    	help
    	  Threshold to start the pulse-event detection procedure on the Y-axis.
    	  Threshold values for each axis are unsigned 5-bit corresponding
    	  to an 2g acceleration full-scale range.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*