:orphan:

.. title:: MAX30101_SR

.. option:: CONFIG_MAX30101_SR

*ADC sample rate control*

Type: ``int``

Help
====

Set the effective sampling rate with one sample consisting of one
pulse/conversion per active LED channel. In SpO2 mode, these means
one IR pulse/conversion and one red pulse/conversion per sample
period.
0 = 50 Hz
1 = 100 Hz
2 = 200 Hz
3 = 400 Hz
4 = 800 Hz
5 = 1000 Hz
6 = 1600 Hz
7 = 3200 Hz

Direct dependencies
===================

\ :option:`MAX30101 <CONFIG_MAX30101>` && \ :option:`SENSOR <CONFIG_SENSOR>`

*(Includes any dependencies from ifs and menus.)*

Default
=======

- 0

Kconfig definition
==================

.. highlight:: kconfig

At ``drivers/sensor/max30101/Kconfig:79``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:32`` → ``drivers/Kconfig:62`` → ``drivers/sensor/Kconfig:141``

Menu path: (Top) → Device Drivers → Sensor Drivers → MAX30101 Pulse Oximeter and Heart Rate Sensor

.. parsed-literal::

    config MAX30101_SR
    	int "ADC sample rate control"
    	range 0 7
    	default 0
    	depends on \ :option:`MAX30101 <CONFIG_MAX30101>` && \ :option:`SENSOR <CONFIG_SENSOR>`
    	help
    	  Set the effective sampling rate with one sample consisting of one
    	  pulse/conversion per active LED channel. In SpO2 mode, these means
    	  one IR pulse/conversion and one red pulse/conversion per sample
    	  period.
    	  0 = 50 Hz
    	  1 = 100 Hz
    	  2 = 200 Hz
    	  3 = 400 Hz
    	  4 = 800 Hz
    	  5 = 1000 Hz
    	  6 = 1600 Hz
    	  7 = 3200 Hz

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*