:orphan:

.. title:: NRFX_TIMER3

.. option:: CONFIG_NRFX_TIMER3

*Enable TIMER3 instance*

*Enable TIMER3 instance*

Type: ``bool``

Direct dependencies
===================

(\ :option:`HAS_HW_NRF_TIMER3 <CONFIG_HAS_HW_NRF_TIMER3>` && \ :option:`HAS_NRFX <CONFIG_HAS_NRFX>`) || (\ :option:`HAS_HW_NRF_TIMER3 <CONFIG_HAS_HW_NRF_TIMER3>` && \ :option:`HAS_NRFX <CONFIG_HAS_NRFX>` && 0) || ((\ :option:`UART_0_NRF_HW_ASYNC_TIMER <CONFIG_UART_0_NRF_HW_ASYNC_TIMER>` = 3 || \ :option:`UART_1_NRF_HW_ASYNC_TIMER <CONFIG_UART_1_NRF_HW_ASYNC_TIMER>` = 3 || \ :option:`UART_3_NRF_HW_ASYNC_TIMER <CONFIG_UART_3_NRF_HW_ASYNC_TIMER>` = 3 || \ :option:`UART_2_NRF_HW_ASYNC_TIMER <CONFIG_UART_2_NRF_HW_ASYNC_TIMER>` = 3) && \ :option:`UART_NRFX <CONFIG_UART_NRFX>` && \ :option:`SERIAL <CONFIG_SERIAL>`)

*(Includes any dependencies from ifs and menus.)*

Default
=======

- y

Symbols selected by this symbol
===============================

- \ :option:`NRFX_TIMER <CONFIG_NRFX_TIMER>`
- \ :option:`NRFX_TIMER <CONFIG_NRFX_TIMER>`

Kconfig definitions
===================

.. highlight:: kconfig

At ``modules/hal_nordic/nrfx/Kconfig:268``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:23`` → ``modules/Kconfig:6`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.modules:8`` → ``modules/hal_nordic/Kconfig:186``

Menu path: (Top) → Modules → hal_nordic (/home/runner/work/bridle/bridle/workspace/modules/hal/nordic) → nrfx drivers

.. parsed-literal::

    config NRFX_TIMER3
    	bool "Enable TIMER3 instance"
    	select \ :option:`NRFX_TIMER <CONFIG_NRFX_TIMER>`
    	depends on \ :option:`HAS_HW_NRF_TIMER3 <CONFIG_HAS_HW_NRF_TIMER3>` && \ :option:`HAS_NRFX <CONFIG_HAS_NRFX>`

----

At ``modules/hal_nordic/nrfx/Kconfig:268``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:23`` → ``modules/Kconfig:59`` → ``modules/hal_nordic/Kconfig:186``

Menu path: (Top) → Modules → nrfx drivers

.. parsed-literal::

    config NRFX_TIMER3
    	bool "Enable TIMER3 instance"
    	select \ :option:`NRFX_TIMER <CONFIG_NRFX_TIMER>`
    	depends on \ :option:`HAS_HW_NRF_TIMER3 <CONFIG_HAS_HW_NRF_TIMER3>` && \ :option:`HAS_NRFX <CONFIG_HAS_NRFX>` && 0

----

At ``drivers/serial/Kconfig.nrfx:330``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:32`` → ``drivers/Kconfig:24`` → ``drivers/serial/Kconfig:93``

Menu path: (Top) → Device Drivers → Serial Drivers → nRF UART nrfx drivers

.. parsed-literal::

    config NRFX_TIMER3
    	bool
    	default y
    	depends on (\ :option:`UART_0_NRF_HW_ASYNC_TIMER <CONFIG_UART_0_NRF_HW_ASYNC_TIMER>` = 3 || \ :option:`UART_1_NRF_HW_ASYNC_TIMER <CONFIG_UART_1_NRF_HW_ASYNC_TIMER>` = 3 || \ :option:`UART_3_NRF_HW_ASYNC_TIMER <CONFIG_UART_3_NRF_HW_ASYNC_TIMER>` = 3 || \ :option:`UART_2_NRF_HW_ASYNC_TIMER <CONFIG_UART_2_NRF_HW_ASYNC_TIMER>` = 3) && \ :option:`UART_NRFX <CONFIG_UART_NRFX>` && \ :option:`SERIAL <CONFIG_SERIAL>`

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*