:orphan:

.. title:: SECOND_CORE_BOOT_ADDRESS_MCUX

.. option:: CONFIG_SECOND_CORE_BOOT_ADDRESS_MCUX

*Address the second core will boot at*

*Address the second core will boot at*

Type: ``hex``

Help
====

This is the address the second core will boot from. Additionally this
address is where we will copy the SECOND_IMAGE to. We default this to
the base of SRAM1.

Help
====

This is the address the second core will boot from.

Direct dependencies
===================

(\ :option:`SECOND_CORE_MCUX <CONFIG_SECOND_CORE_MCUX>` && \ :option:`SOC_SERIES_LPC54XXX <CONFIG_SOC_SERIES_LPC54XXX>` && \ :option:`SOC_FAMILY_LPC <CONFIG_SOC_FAMILY_LPC>`) || (\ :option:`SECOND_CORE_MCUX <CONFIG_SECOND_CORE_MCUX>` && \ :option:`SOC_SERIES_LPC55XXX <CONFIG_SOC_SERIES_LPC55XXX>` && \ :option:`SOC_FAMILY_LPC <CONFIG_SOC_FAMILY_LPC>`)

*(Includes any dependencies from ifs and menus.)*

Defaults
========

- 0x20010000
- 0x0

Kconfig definitions
===================

.. highlight:: kconfig

At ``soc/arm/nxp_lpc/lpc54xxx/Kconfig.soc:54``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:28`` → ``soc/Kconfig:11`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.arch:2`` → ``soc/arm/nxp_lpc/Kconfig:14``

Menu path: (Top) → Hardware Configuration → Enable LPC54114 Cortex-M0 second core

.. parsed-literal::

    config SECOND_CORE_BOOT_ADDRESS_MCUX
    	hex "Address the second core will boot at"
    	default 0x20010000
    	depends on \ :option:`SECOND_CORE_MCUX <CONFIG_SECOND_CORE_MCUX>` && \ :option:`SOC_SERIES_LPC54XXX <CONFIG_SOC_SERIES_LPC54XXX>` && \ :option:`SOC_FAMILY_LPC <CONFIG_SOC_FAMILY_LPC>`
    	help
    	  This is the address the second core will boot from. Additionally this
    	  address is where we will copy the SECOND_IMAGE to. We default this to
    	  the base of SRAM1.

----

At ``soc/arm/nxp_lpc/lpc55xxx/Kconfig.soc:95``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:28`` → ``soc/Kconfig:11`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.arch:2`` → ``soc/arm/nxp_lpc/Kconfig:14``

Menu path: (Top) → Hardware Configuration → Enable LPC55xxx's second core

.. parsed-literal::

    config SECOND_CORE_BOOT_ADDRESS_MCUX
    	hex "Address the second core will boot at"
    	default 0x0
    	depends on \ :option:`SECOND_CORE_MCUX <CONFIG_SECOND_CORE_MCUX>` && \ :option:`SOC_SERIES_LPC55XXX <CONFIG_SOC_SERIES_LPC55XXX>` && \ :option:`SOC_FAMILY_LPC <CONFIG_SOC_FAMILY_LPC>`
    	help
    	  This is the address the second core will boot from.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*