:orphan:

.. title:: SOC_ATMEL_SAMV71_PLLA_MULA

.. option:: CONFIG_SOC_ATMEL_SAMV71_PLLA_MULA

*PLL MULA*

Type: ``int``

Help
====

This is the multiplier MULA used by the PLL.
The processor clock is (MAINCK * (MULA + 1) / DIVA).

Board config file can override this settings
for a particular board.

Setting MULA=0 would disable PLL at boot, this is currently
not supported.

With default of MULA == 24, and DIVA == 1,
PLL is running at 25 times the main clock frequency.

Direct dependencies
===================

\ :option:`SOC_SERIES_SAMV71 <CONFIG_SOC_SERIES_SAMV71>` && \ :option:`SOC_FAMILY_SAM <CONFIG_SOC_FAMILY_SAM>`

*(Includes any dependencies from ifs and menus.)*

Default
=======

- 24

Kconfig definition
==================

.. highlight:: kconfig

At ``soc/arm/atmel_sam/samv71/Kconfig.soc:117``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:28`` → ``soc/Kconfig:11`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.arch:2`` → ``soc/arm/atmel_sam/Kconfig:17``

Menu path: (Top) → Hardware Configuration

.. parsed-literal::

    config SOC_ATMEL_SAMV71_PLLA_MULA
    	int "PLL MULA"
    	range 1 62
    	default 24
    	depends on \ :option:`SOC_SERIES_SAMV71 <CONFIG_SOC_SERIES_SAMV71>` && \ :option:`SOC_FAMILY_SAM <CONFIG_SOC_FAMILY_SAM>`
    	help
    	  This is the multiplier MULA used by the PLL.
    	  The processor clock is (MAINCK * (MULA + 1) / DIVA).
	  
    	  Board config file can override this settings
    	  for a particular board.
	  
    	  Setting MULA=0 would disable PLL at boot, this is currently
    	  not supported.
	  
    	  With default of MULA == 24, and DIVA == 1,
    	  PLL is running at 25 times the main clock frequency.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*