:orphan:

.. title:: SPI_4_NRF_RX_DELAY

.. option:: CONFIG_SPI_4_NRF_RX_DELAY

*SPIM4 MISO sampling delay*

Type: ``int``

Help
====

Number of 64 MHz clock cycles (15.625 ns) delay from the sampling
edge of SCK (leading or trailing, depending on the CPHA setting used)
until the input serial data on MISO is actually sampled.

Direct dependencies
===================

\ :option:`SPI_4_NRF_SPIM <CONFIG_SPI_4_NRF_SPIM>` && \ :option:`SOC_NRF5340_CPUAPP <CONFIG_SOC_NRF5340_CPUAPP>` && \ :option:`SPI_NRFX <CONFIG_SPI_NRFX>` && \ :option:`SPI <CONFIG_SPI>`

*(Includes any dependencies from ifs and menus.)*

Default
=======

- 2

Kconfig definition
==================

.. highlight:: kconfig

At ``drivers/spi/Kconfig.nrfx:182``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:32`` → ``drivers/Kconfig:38`` → ``drivers/spi/Kconfig:212``

Menu path: (Top) → Device Drivers → SPI hardware bus support → nRF SPI nrfx drivers

.. parsed-literal::

    config SPI_4_NRF_RX_DELAY
    	int "SPIM4 MISO sampling delay"
    	range 0 7
    	default 2
    	depends on \ :option:`SPI_4_NRF_SPIM <CONFIG_SPI_4_NRF_SPIM>` && \ :option:`SOC_NRF5340_CPUAPP <CONFIG_SOC_NRF5340_CPUAPP>` && \ :option:`SPI_NRFX <CONFIG_SPI_NRFX>` && \ :option:`SPI <CONFIG_SPI>`
    	help
    	  Number of 64 MHz clock cycles (15.625 ns) delay from the sampling
    	  edge of SCK (leading or trailing, depending on the CPHA setting used)
    	  until the input serial data on MISO is actually sampled.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*