:orphan:

.. title:: UART_GECKO

.. option:: CONFIG_UART_GECKO

*Gecko UART/USART driver*

Type: ``bool``

Help
====

Enable the Gecko uart driver.

Direct dependencies
===================

(\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`BOARD_EFR32_RADIO <CONFIG_BOARD_EFR32_RADIO>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFM32GG11B <CONFIG_SOC_SERIES_EFM32GG11B>` && \ :option:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFM32HG <CONFIG_SOC_SERIES_EFM32HG>` && \ :option:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFM32JG12B <CONFIG_SOC_SERIES_EFM32JG12B>` && \ :option:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFM32PG12B <CONFIG_SOC_SERIES_EFM32PG12B>` && \ :option:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFM32PG1B <CONFIG_SOC_SERIES_EFM32PG1B>` && \ :option:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFM32WG <CONFIG_SOC_SERIES_EFM32WG>` && \ :option:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFR32FG1P <CONFIG_SOC_SERIES_EFR32FG1P>` && \ :option:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFR32MG12P <CONFIG_SOC_SERIES_EFR32MG12P>` && \ :option:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFR32MG21 <CONFIG_SOC_SERIES_EFR32MG21>` && \ :option:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`) || (\ :option:`HAS_SILABS_GECKO <CONFIG_HAS_SILABS_GECKO>` && \ :option:`GPIO_GECKO <CONFIG_GPIO_GECKO>` && \ :option:`SERIAL <CONFIG_SERIAL>`)

*(Includes any dependencies from ifs and menus.)*

Defaults
========

- y
- y
- y
- y
- y
- y
- y
- y
- y
- y

Symbols selected by this symbol
===============================

- \ :option:`SERIAL_HAS_DRIVER <CONFIG_SERIAL_HAS_DRIVER>`
- \ :option:`SERIAL_SUPPORT_INTERRUPT <CONFIG_SERIAL_SUPPORT_INTERRUPT>`
- \ :option:`SOC_GECKO_USART <CONFIG_SOC_GECKO_USART>`

Kconfig definitions
===================

.. highlight:: kconfig

At ``boards/arm/efr32_radio/Kconfig.defconfig:24``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. parsed-literal::

    config UART_GECKO
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`BOARD_EFR32_RADIO <CONFIG_BOARD_EFR32_RADIO>`

----

At ``soc/arm/silabs_exx32/efm32gg11b/Kconfig.defconfig.efm32gg11b:12``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/silabs_exx32/Kconfig.defconfig:5`` → ``soc/arm/silabs_exx32/efm32gg11b/Kconfig.defconfig.series:20``

Menu path: (Top)

.. parsed-literal::

    config UART_GECKO
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFM32GG11B <CONFIG_SOC_SERIES_EFM32GG11B>` && \ :option:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`

----

At ``soc/arm/silabs_exx32/efm32hg/Kconfig.defconfig.efm32hg:10``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/silabs_exx32/Kconfig.defconfig:5`` → ``soc/arm/silabs_exx32/efm32hg/Kconfig.defconfig.series:19``

Menu path: (Top)

.. parsed-literal::

    config UART_GECKO
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFM32HG <CONFIG_SOC_SERIES_EFM32HG>` && \ :option:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`

----

At ``soc/arm/silabs_exx32/efm32jg12b/Kconfig.defconfig.efm32jg12b:12``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/silabs_exx32/Kconfig.defconfig:5`` → ``soc/arm/silabs_exx32/efm32jg12b/Kconfig.defconfig.series:18``

Menu path: (Top)

.. parsed-literal::

    config UART_GECKO
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFM32JG12B <CONFIG_SOC_SERIES_EFM32JG12B>` && \ :option:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`

----

At ``soc/arm/silabs_exx32/efm32pg12b/Kconfig.defconfig.efm32pg12b:12``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/silabs_exx32/Kconfig.defconfig:5`` → ``soc/arm/silabs_exx32/efm32pg12b/Kconfig.defconfig.series:18``

Menu path: (Top)

.. parsed-literal::

    config UART_GECKO
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFM32PG12B <CONFIG_SOC_SERIES_EFM32PG12B>` && \ :option:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`

----

At ``soc/arm/silabs_exx32/efm32pg1b/Kconfig.defconfig.efm32pg1b:12``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/silabs_exx32/Kconfig.defconfig:5`` → ``soc/arm/silabs_exx32/efm32pg1b/Kconfig.defconfig.series:18``

Menu path: (Top)

.. parsed-literal::

    config UART_GECKO
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFM32PG1B <CONFIG_SOC_SERIES_EFM32PG1B>` && \ :option:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`

----

At ``soc/arm/silabs_exx32/efm32wg/Kconfig.defconfig.efm32wg:10``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/silabs_exx32/Kconfig.defconfig:5`` → ``soc/arm/silabs_exx32/efm32wg/Kconfig.defconfig.series:18``

Menu path: (Top)

.. parsed-literal::

    config UART_GECKO
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFM32WG <CONFIG_SOC_SERIES_EFM32WG>` && \ :option:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`

----

At ``soc/arm/silabs_exx32/efr32fg1p/Kconfig.defconfig.efr32fg1p:10``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/silabs_exx32/Kconfig.defconfig:5`` → ``soc/arm/silabs_exx32/efr32fg1p/Kconfig.defconfig.series:18``

Menu path: (Top)

.. parsed-literal::

    config UART_GECKO
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFR32FG1P <CONFIG_SOC_SERIES_EFR32FG1P>` && \ :option:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`

----

At ``soc/arm/silabs_exx32/efr32mg12p/Kconfig.defconfig.efr32mg12p:12``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/silabs_exx32/Kconfig.defconfig:5`` → ``soc/arm/silabs_exx32/efr32mg12p/Kconfig.defconfig.series:18``

Menu path: (Top)

.. parsed-literal::

    config UART_GECKO
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFR32MG12P <CONFIG_SOC_SERIES_EFR32MG12P>` && \ :option:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`

----

At ``soc/arm/silabs_exx32/efr32mg21/Kconfig.defconfig.efr32mg21:10``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/silabs_exx32/Kconfig.defconfig:5`` → ``soc/arm/silabs_exx32/efr32mg21/Kconfig.defconfig.series:19``

Menu path: (Top)

.. parsed-literal::

    config UART_GECKO
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_SERIES_EFR32MG21 <CONFIG_SOC_SERIES_EFR32MG21>` && \ :option:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`

----

At ``drivers/serial/Kconfig.gecko:6``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:32`` → ``drivers/Kconfig:24`` → ``drivers/serial/Kconfig:107``

Menu path: (Top) → Device Drivers → Serial Drivers

.. parsed-literal::

    config UART_GECKO
    	bool "Gecko UART/USART driver"
    	select \ :option:`SERIAL_HAS_DRIVER <CONFIG_SERIAL_HAS_DRIVER>`
    	select \ :option:`SERIAL_SUPPORT_INTERRUPT <CONFIG_SERIAL_SUPPORT_INTERRUPT>`
    	select \ :option:`SOC_GECKO_USART <CONFIG_SOC_GECKO_USART>`
    	depends on \ :option:`HAS_SILABS_GECKO <CONFIG_HAS_SILABS_GECKO>` && \ :option:`GPIO_GECKO <CONFIG_GPIO_GECKO>` && \ :option:`SERIAL <CONFIG_SERIAL>`
    	help
    	  Enable the Gecko uart driver.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*