:orphan:

.. title:: UART_MCUX_FLEXCOMM

.. option:: CONFIG_UART_MCUX_FLEXCOMM

*MCUX FLEXCOMM UART driver*

Type: ``bool``

Help
====

Enable the MCUX USART driver.

Direct dependencies
===================

(\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_MIMXRT685S_CM33 <CONFIG_SOC_MIMXRT685S_CM33>` && \ :option:`SOC_SERIES_IMX_RT6XX <CONFIG_SOC_SERIES_IMX_RT6XX>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_LPC54114_M0 <CONFIG_SOC_LPC54114_M0>` && \ :option:`SOC_SERIES_LPC54XXX <CONFIG_SOC_SERIES_LPC54XXX>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_LPC54114_M4 <CONFIG_SOC_LPC54114_M4>` && \ :option:`SOC_SERIES_LPC54XXX <CONFIG_SOC_SERIES_LPC54XXX>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_LPC55S16 <CONFIG_SOC_LPC55S16>` && \ :option:`SOC_SERIES_LPC55XXX <CONFIG_SOC_SERIES_LPC55XXX>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_LPC55S28 <CONFIG_SOC_LPC55S28>` && \ :option:`SOC_SERIES_LPC55XXX <CONFIG_SOC_SERIES_LPC55XXX>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_LPC55S69_CPU0 <CONFIG_SOC_LPC55S69_CPU0>` && \ :option:`SOC_SERIES_LPC55XXX <CONFIG_SOC_SERIES_LPC55XXX>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_LPC55S69_CPU1 <CONFIG_SOC_LPC55S69_CPU1>` && \ :option:`SOC_SERIES_LPC55XXX <CONFIG_SOC_SERIES_LPC55XXX>`) || (\ :option:`HAS_MCUX_FLEXCOMM <CONFIG_HAS_MCUX_FLEXCOMM>` && \ :option:`SERIAL <CONFIG_SERIAL>`)

*(Includes any dependencies from ifs and menus.)*

Defaults
========

- y if \ :option:`HAS_MCUX_FLEXCOMM <CONFIG_HAS_MCUX_FLEXCOMM>`
- n
- y
- y
- y
- y
- n

Symbols selected by this symbol
===============================

- \ :option:`SERIAL_HAS_DRIVER <CONFIG_SERIAL_HAS_DRIVER>`
- \ :option:`SERIAL_SUPPORT_INTERRUPT <CONFIG_SERIAL_SUPPORT_INTERRUPT>`

Kconfig definitions
===================

.. highlight:: kconfig

At ``soc/arm/nxp_imx/rt6xx/Kconfig.defconfig.mimxrt685_cm33:19``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/nxp_imx/Kconfig.defconfig:4`` → ``soc/arm/nxp_imx/rt6xx/Kconfig.defconfig.series:17``

Menu path: (Top)

.. parsed-literal::

    config UART_MCUX_FLEXCOMM
    	bool
    	default y if \ :option:`HAS_MCUX_FLEXCOMM <CONFIG_HAS_MCUX_FLEXCOMM>`
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_MIMXRT685S_CM33 <CONFIG_SOC_MIMXRT685S_CM33>` && \ :option:`SOC_SERIES_IMX_RT6XX <CONFIG_SOC_SERIES_IMX_RT6XX>`

----

At ``soc/arm/nxp_lpc/lpc54xxx/Kconfig.defconfig.lpc54114_m0:22``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/nxp_lpc/Kconfig.defconfig:4`` → ``soc/arm/nxp_lpc/lpc54xxx/Kconfig.defconfig.series:15``

Menu path: (Top)

.. parsed-literal::

    config UART_MCUX_FLEXCOMM
    	bool
    	default n
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_LPC54114_M0 <CONFIG_SOC_LPC54114_M0>` && \ :option:`SOC_SERIES_LPC54XXX <CONFIG_SOC_SERIES_LPC54XXX>`

----

At ``soc/arm/nxp_lpc/lpc54xxx/Kconfig.defconfig.lpc54114_m4:19``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/nxp_lpc/Kconfig.defconfig:4`` → ``soc/arm/nxp_lpc/lpc54xxx/Kconfig.defconfig.series:15``

Menu path: (Top)

.. parsed-literal::

    config UART_MCUX_FLEXCOMM
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_LPC54114_M4 <CONFIG_SOC_LPC54114_M4>` && \ :option:`SOC_SERIES_LPC54XXX <CONFIG_SOC_SERIES_LPC54XXX>`

----

At ``soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.lpc55S16:19``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/nxp_lpc/Kconfig.defconfig:4`` → ``soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.series:18``

Menu path: (Top)

.. parsed-literal::

    config UART_MCUX_FLEXCOMM
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_LPC55S16 <CONFIG_SOC_LPC55S16>` && \ :option:`SOC_SERIES_LPC55XXX <CONFIG_SOC_SERIES_LPC55XXX>`

----

At ``soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.lpc55S28:19``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/nxp_lpc/Kconfig.defconfig:4`` → ``soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.series:18``

Menu path: (Top)

.. parsed-literal::

    config UART_MCUX_FLEXCOMM
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_LPC55S28 <CONFIG_SOC_LPC55S28>` && \ :option:`SOC_SERIES_LPC55XXX <CONFIG_SOC_SERIES_LPC55XXX>`

----

At ``soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.lpc55S69_cpu0:19``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/nxp_lpc/Kconfig.defconfig:4`` → ``soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.series:18``

Menu path: (Top)

.. parsed-literal::

    config UART_MCUX_FLEXCOMM
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_LPC55S69_CPU0 <CONFIG_SOC_LPC55S69_CPU0>` && \ :option:`SOC_SERIES_LPC55XXX <CONFIG_SOC_SERIES_LPC55XXX>`

----

At ``soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.lpc55S69_cpu1:25``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1`` → ``soc/arm/nxp_lpc/Kconfig.defconfig:4`` → ``soc/arm/nxp_lpc/lpc55xxx/Kconfig.defconfig.series:18``

Menu path: (Top)

.. parsed-literal::

    config UART_MCUX_FLEXCOMM
    	bool
    	default n
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_LPC55S69_CPU1 <CONFIG_SOC_LPC55S69_CPU1>` && \ :option:`SOC_SERIES_LPC55XXX <CONFIG_SOC_SERIES_LPC55XXX>`

----

At ``drivers/serial/Kconfig.mcux_flexcomm:6``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:32`` → ``drivers/Kconfig:24`` → ``drivers/serial/Kconfig:71``

Menu path: (Top) → Device Drivers → Serial Drivers

.. parsed-literal::

    config UART_MCUX_FLEXCOMM
    	bool "MCUX FLEXCOMM UART driver"
    	select \ :option:`SERIAL_HAS_DRIVER <CONFIG_SERIAL_HAS_DRIVER>`
    	select \ :option:`SERIAL_SUPPORT_INTERRUPT <CONFIG_SERIAL_SUPPORT_INTERRUPT>`
    	depends on \ :option:`HAS_MCUX_FLEXCOMM <CONFIG_HAS_MCUX_FLEXCOMM>` && \ :option:`SERIAL <CONFIG_SERIAL>`
    	help
    	  Enable the MCUX USART driver.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*