:orphan:

.. title:: UART_PL011_PORT0

.. option:: CONFIG_UART_PL011_PORT0

*Enable driver for UART 0*

Type: ``bool``

Help
====

Build the driver to utilize UART controller Port 0.

Direct dependencies
===================

(\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`BOARD_MUSCA_A <CONFIG_BOARD_MUSCA_A>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`BOARD_MUSCA_B1 <CONFIG_BOARD_MUSCA_B1>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`BOARD_MUSCA_S1 <CONFIG_BOARD_MUSCA_S1>`) || (\ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_EOS_S3 <CONFIG_SOC_EOS_S3>`) || (\ :option:`UART_PL011 <CONFIG_UART_PL011>` && \ :option:`SERIAL <CONFIG_SERIAL>`)

*(Includes any dependencies from ifs and menus.)*

Defaults
========

- y
- y
- y
- y

Kconfig definitions
===================

.. highlight:: kconfig

At ``boards/arm/v2m_musca/Kconfig.defconfig:28``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. parsed-literal::

    config UART_PL011_PORT0
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`BOARD_MUSCA_A <CONFIG_BOARD_MUSCA_A>`

----

At ``boards/arm/v2m_musca_b1/Kconfig.defconfig:25``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. parsed-literal::

    config UART_PL011_PORT0
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`BOARD_MUSCA_B1 <CONFIG_BOARD_MUSCA_B1>`

----

At ``boards/arm/v2m_musca_s1/Kconfig.defconfig:25``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. parsed-literal::

    config UART_PL011_PORT0
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`BOARD_MUSCA_S1 <CONFIG_BOARD_MUSCA_S1>`

----

At ``soc/arm/quicklogic_eos_s3/Kconfig.defconfig:23``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``/home/runner/work/bridle/bridle/workspace/build/Kconfig/Kconfig.soc.defconfig:1``

Menu path: (Top)

.. parsed-literal::

    config UART_PL011_PORT0
    	bool
    	default y
    	depends on \ :option:`SERIAL <CONFIG_SERIAL>` && \ :option:`SOC_EOS_S3 <CONFIG_SOC_EOS_S3>`

----

At ``drivers/serial/Kconfig.pl011:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:32`` → ``drivers/Kconfig:24`` → ``drivers/serial/Kconfig:119``

Menu path: (Top) → Device Drivers → Serial Drivers → ARM PL011 UART Driver

.. parsed-literal::

    config UART_PL011_PORT0
    	bool "Enable driver for UART 0"
    	depends on \ :option:`UART_PL011 <CONFIG_UART_PL011>` && \ :option:`SERIAL <CONFIG_SERIAL>`
    	help
    	  Build the driver to utilize UART controller Port 0.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*