:orphan:

.. title:: FLASH_MCUX_FLEXSPI_XIP

.. option:: CONFIG_FLASH_MCUX_FLEXSPI_XIP

*MCUX FlexSPI flash access with xip*

Type: ``bool``

Help
====

.. code-block:: none

    Allows using the flash API while running in XIP.
    WARNING: It is possible to overwrite the running application itself.

Direct dependencies
===================

\ :option:`BOARD_MIMXRT1060_EVK <CONFIG_BOARD_MIMXRT1060_EVK>` || \ :option:`BOARD_MIMXRT1060_EVK_HYPERFLASH <CONFIG_BOARD_MIMXRT1060_EVK_HYPERFLASH>` || \ :option:`BOARD_MIMXRT1064_EVK <CONFIG_BOARD_MIMXRT1064_EVK>` || \ :option:`BOARD_MIMXRT685_EVK <CONFIG_BOARD_MIMXRT685_EVK>` || (\ :option:`MEMC_MCUX_FLEXSPI <CONFIG_MEMC_MCUX_FLEXSPI>` && (\ :option:`CODE_FLEXSPI <CONFIG_CODE_FLEXSPI>` || \ :option:`CODE_FLEXSPI2 <CONFIG_CODE_FLEXSPI2>` || \ :option:`SOC_SERIES_IMX_RT6XX <CONFIG_SOC_SERIES_IMX_RT6XX>`) && \ :option:`HAS_MCUX_FLEXSPI <CONFIG_HAS_MCUX_FLEXSPI>` && \ :option:`FLASH <CONFIG_FLASH>`)

*(Includes any dependencies from ifs and menus.)*

Defaults
========

- y if \ :option:`FLASH <CONFIG_FLASH>` && \ :option:`BOARD_MIMXRT1060_EVK <CONFIG_BOARD_MIMXRT1060_EVK>`
- y if \ :option:`FLASH <CONFIG_FLASH>`
- y if \ :option:`FLASH <CONFIG_FLASH>`

Symbols selected by this symbol
===============================

- \ :option:`XIP <CONFIG_XIP>`

Kconfig definitions
===================



At ``<Zephyr Boards>/arm/mimxrt1060_evk/Kconfig.defconfig:22``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. code-block:: kconfig

    config FLASH_MCUX_FLEXSPI_XIP
    	bool
    	default y if FLASH && BOARD_MIMXRT1060_EVK
    	depends on BOARD_MIMXRT1060_EVK || BOARD_MIMXRT1060_EVK_HYPERFLASH

----

At ``<Zephyr Boards>/arm/mimxrt1064_evk/Kconfig.defconfig:21``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. code-block:: kconfig

    config FLASH_MCUX_FLEXSPI_XIP
    	bool
    	default y if FLASH
    	depends on BOARD_MIMXRT1064_EVK

----

At ``<Zephyr Boards>/arm/mimxrt685_evk/Kconfig.defconfig:20``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. code-block:: kconfig

    config FLASH_MCUX_FLEXSPI_XIP
    	bool
    	default y if FLASH
    	depends on BOARD_MIMXRT685_EVK

----

At ``<Zephyr Driver>/flash/Kconfig.mcux:53``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:32`` → ``<Zephyr Driver>/Kconfig:60`` → ``<Zephyr Driver>/flash/Kconfig:69``

Menu path: (Top) → Device Drivers → Flash hardware support

.. code-block:: kconfig

    config FLASH_MCUX_FLEXSPI_XIP
    	bool "MCUX FlexSPI flash access with xip"
    	select XIP
    	depends on MEMC_MCUX_FLEXSPI && (CODE_FLEXSPI || CODE_FLEXSPI2 || SOC_SERIES_IMX_RT6XX) && HAS_MCUX_FLEXSPI && FLASH
    	help
    	  Allows using the flash API while running in XIP.
    	  WARNING: It is possible to overwrite the running application itself.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*