:orphan:

.. title:: CLOCK_CONTROL_STM32_CUBE

.. option:: CONFIG_CLOCK_CONTROL_STM32_CUBE

*STM32 Reset & Clock Control*

Type: ``bool``

Help
====

.. code-block:: none

    Enable driver for Reset & Clock Control subsystem found
    in STM32 family of MCUs

Direct dependencies
===================

(\ :option:`CLOCK_CONTROL <CONFIG_CLOCK_CONTROL>` && \ :option:`SOC_FAMILY_STM32 <CONFIG_SOC_FAMILY_STM32>`) || (\ :option:`SOC_FAMILY_STM32 <CONFIG_SOC_FAMILY_STM32>` && \ :option:`CLOCK_CONTROL <CONFIG_CLOCK_CONTROL>`)

*(Includes any dependencies from ifs and menus.)*

Default
=======

- y

Symbols selected by this symbol
===============================

- \ :option:`USE_STM32_LL_UTILS <CONFIG_USE_STM32_LL_UTILS>`
- \ :option:`USE_STM32_LL_RCC <CONFIG_USE_STM32_LL_RCC>` if \ :option:`SOC_SERIES_STM32MP1X <CONFIG_SOC_SERIES_STM32MP1X>`

Symbols that select this symbol
===============================

- \ :option:`SOC_SERIES_STM32G4X <CONFIG_SOC_SERIES_STM32G4X>`
- \ :option:`SOC_SERIES_STM32WLX <CONFIG_SOC_SERIES_STM32WLX>`

Kconfig definitions
===================



At ``<Zephyr SoC>/arm/st_stm32/common/Kconfig.defconfig.series:24``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``<BuildDir>/kconfig/Kconfig.soc.defconfig:1`` → ``<Zephyr SoC>/arm/st_stm32/Kconfig.defconfig:3``

Menu path: (Top)

.. code-block:: kconfig

    config CLOCK_CONTROL_STM32_CUBE
    	bool
    	default y
    	depends on CLOCK_CONTROL && SOC_FAMILY_STM32

----

At ``<Zephyr Driver>/clock_control/Kconfig.stm32:7``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:32`` → ``<Zephyr Driver>/Kconfig:54`` → ``<Zephyr Driver>/clock_control/Kconfig:25``

Menu path: (Top) → Device Drivers → Hardware clock controller support

.. code-block:: kconfig

    menuconfig CLOCK_CONTROL_STM32_CUBE
    	bool "STM32 Reset & Clock Control"
    	select USE_STM32_LL_UTILS
    	select USE_STM32_LL_RCC if SOC_SERIES_STM32MP1X
    	depends on SOC_FAMILY_STM32 && CLOCK_CONTROL
    	help
    	  Enable driver for Reset & Clock Control subsystem found
    	  in STM32 family of MCUs

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*