:orphan:

.. title:: CLOCK_STM32_PLL3_N_MULTIPLIER

.. option:: CONFIG_CLOCK_STM32_PLL3_N_MULTIPLIER

*PLL3 VCO multiplier*

Type: ``int``

Help
====

.. code-block:: none

    PLL3 multiplier, allowed values: 4-512.

Direct dependencies
===================

\ :option:`CLOCK_STM32_PLL3_ENABLE <CONFIG_CLOCK_STM32_PLL3_ENABLE>` && \ :option:`SOC_SERIES_STM32H7X <CONFIG_SOC_SERIES_STM32H7X>` && !\ :option:`CLOCK_CONTROL_STM32_HAS_DTS <CONFIG_CLOCK_CONTROL_STM32_HAS_DTS>` && !\ :option:`SOC_SERIES_STM32MP1X <CONFIG_SOC_SERIES_STM32MP1X>` && \ :option:`CLOCK_CONTROL_STM32_CUBE <CONFIG_CLOCK_CONTROL_STM32_CUBE>` && \ :option:`CLOCK_CONTROL <CONFIG_CLOCK_CONTROL>`

*(Includes any dependencies from ifs and menus.)*

Default
=======

- 129

Kconfig definition
==================



At ``<Zephyr Driver>/clock_control/Kconfig.stm32h7:123``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:32`` → ``<Zephyr Driver>/Kconfig:54`` → ``<Zephyr Driver>/clock_control/Kconfig:25`` → ``<Zephyr Driver>/clock_control/Kconfig.stm32:153``

Menu path: (Top) → Device Drivers → Hardware clock controller support → STM32 Reset & Clock Control → Enable PLL3

.. code-block:: kconfig

    config CLOCK_STM32_PLL3_N_MULTIPLIER
    	int "PLL3 VCO multiplier"
    	range 4 512
    	default 129
    	depends on CLOCK_STM32_PLL3_ENABLE && SOC_SERIES_STM32H7X && !CLOCK_CONTROL_STM32_HAS_DTS && !SOC_SERIES_STM32MP1X && CLOCK_CONTROL_STM32_CUBE && CLOCK_CONTROL
    	help
    	  PLL3 multiplier, allowed values: 4-512.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*