:orphan:

.. title:: CLOCK_STM32_PLL_DIVISOR

.. option:: CONFIG_CLOCK_STM32_PLL_DIVISOR

*PLL divisor*

Type: ``int``

Help
====

.. code-block:: none

    PLL divisor, allowed values: 2-4.

Direct dependencies
===================

\ :option:`CLOCK_STM32_SYSCLK_SRC_PLL <CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL>` && (\ :option:`SOC_SERIES_STM32L0X <CONFIG_SOC_SERIES_STM32L0X>` || \ :option:`SOC_SERIES_STM32L1X <CONFIG_SOC_SERIES_STM32L1X>`) && !\ :option:`CLOCK_CONTROL_STM32_HAS_DTS <CONFIG_CLOCK_CONTROL_STM32_HAS_DTS>` && !\ :option:`SOC_SERIES_STM32MP1X <CONFIG_SOC_SERIES_STM32MP1X>` && \ :option:`CLOCK_CONTROL_STM32_CUBE <CONFIG_CLOCK_CONTROL_STM32_CUBE>` && \ :option:`CLOCK_CONTROL <CONFIG_CLOCK_CONTROL>`

*(Includes any dependencies from ifs and menus.)*

Default
=======

- 2

Kconfig definition
==================



At ``<Zephyr Driver>/clock_control/Kconfig.stm32l0_l1:17``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:32`` → ``<Zephyr Driver>/Kconfig:54`` → ``<Zephyr Driver>/clock_control/Kconfig:25`` → ``<Zephyr Driver>/clock_control/Kconfig.stm32:154``

Menu path: (Top) → Device Drivers → Hardware clock controller support → STM32 Reset & Clock Control

.. code-block:: kconfig

    config CLOCK_STM32_PLL_DIVISOR
    	int "PLL divisor"
    	range 2 4
    	default 2
    	depends on CLOCK_STM32_SYSCLK_SRC_PLL && (SOC_SERIES_STM32L0X || SOC_SERIES_STM32L1X) && !CLOCK_CONTROL_STM32_HAS_DTS && !SOC_SERIES_STM32MP1X && CLOCK_CONTROL_STM32_CUBE && CLOCK_CONTROL
    	help
    	  PLL divisor, allowed values: 2-4.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*