:orphan:

.. title:: ETH_MCUX

.. option:: CONFIG_ETH_MCUX

*MCUX Ethernet driver*

Type: ``bool``

Help
====

.. code-block:: none

    Enable MCUX Ethernet driver.  Note, this driver performs one shot PHY
    setup.  There is no support for PHY disconnect, reconnect or
    configuration change.

Direct dependencies
===================

(\ :option:`NETWORKING <CONFIG_NETWORKING>` && \ :option:`BOARD_IP_K66F <CONFIG_BOARD_IP_K66F>`) || (\ :option:`NET_L2_ETHERNET <CONFIG_NET_L2_ETHERNET>` && \ :option:`SOC_SERIES_IMX_RT <CONFIG_SOC_SERIES_IMX_RT>`) || (\ :option:`NET_L2_ETHERNET <CONFIG_NET_L2_ETHERNET>` && \ :option:`SOC_MK64F12 <CONFIG_SOC_MK64F12>` && \ :option:`SOC_SERIES_KINETIS_K6X <CONFIG_SOC_SERIES_KINETIS_K6X>`) || (\ :option:`HAS_MCUX_ENET <CONFIG_HAS_MCUX_ENET>` && \ :option:`NET_L2_ETHERNET <CONFIG_NET_L2_ETHERNET>`)

*(Includes any dependencies from ifs and menus.)*

Defaults
========

- y if \ :option:`NET_L2_ETHERNET <CONFIG_NET_L2_ETHERNET>`
- y if \ :option:`HAS_MCUX_ENET <CONFIG_HAS_MCUX_ENET>`
- y

Symbols selected by this symbol
===============================

- \ :option:`NOCACHE_MEMORY <CONFIG_NOCACHE_MEMORY>` if \ :option:`HAS_MCUX_CACHE <CONFIG_HAS_MCUX_CACHE>`
- \ :option:`ARM_MPU <CONFIG_ARM_MPU>` if \ :option:`CPU_CORTEX_M7 <CONFIG_CPU_CORTEX_M7>`
- \ :option:`NET_POWER_MANAGEMENT <CONFIG_NET_POWER_MANAGEMENT>` if \ :option:`PM_DEVICE <CONFIG_PM_DEVICE>`

Kconfig definitions
===================



At ``<Zephyr Boards>/arm/ip_k66f/Kconfig.defconfig:28``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:18``

Menu path: (Top)

.. code-block:: kconfig

    config ETH_MCUX
    	bool
    	default y if NET_L2_ETHERNET
    	depends on NETWORKING && BOARD_IP_K66F

----

At ``<Zephyr SoC>/arm/nxp_imx/rt/Kconfig.defconfig.series:43``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``<BuildDir>/kconfig/Kconfig.soc.defconfig:1`` → ``<Zephyr SoC>/arm/nxp_imx/Kconfig.defconfig:4``

Menu path: (Top)

.. code-block:: kconfig

    config ETH_MCUX
    	bool
    	default y if HAS_MCUX_ENET
    	depends on NET_L2_ETHERNET && SOC_SERIES_IMX_RT

----

At ``<Zephyr SoC>/arm/nxp_kinetis/k6x/Kconfig.defconfig.mk64f12:59``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:19`` → ``<BuildDir>/kconfig/Kconfig.soc.defconfig:1`` → ``<Zephyr SoC>/arm/nxp_kinetis/Kconfig.defconfig:3`` → ``<Zephyr SoC>/arm/nxp_kinetis/k6x/Kconfig.defconfig.series:26``

Menu path: (Top)

.. code-block:: kconfig

    config ETH_MCUX
    	bool
    	default y
    	depends on NET_L2_ETHERNET && SOC_MK64F12 && SOC_SERIES_KINETIS_K6X

----

At ``<Zephyr Driver>/ethernet/Kconfig.mcux:6``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:32`` → ``<Zephyr Driver>/Kconfig:20`` → ``<Zephyr Driver>/ethernet/Kconfig:49``

Menu path: (Top) → Device Drivers → Ethernet Drivers

.. code-block:: kconfig

    menuconfig ETH_MCUX
    	bool "MCUX Ethernet driver"
    	select NOCACHE_MEMORY if HAS_MCUX_CACHE
    	select ARM_MPU if CPU_CORTEX_M7
    	select NET_POWER_MANAGEMENT if PM_DEVICE
    	depends on HAS_MCUX_ENET && NET_L2_ETHERNET
    	help
    	  Enable MCUX Ethernet driver.  Note, this driver performs one shot PHY
    	  setup.  There is no support for PHY disconnect, reconnect or
    	  configuration change.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*