:orphan:

.. title:: SOC_ATMEL_SAM3X_PLLA_MULA

.. option:: CONFIG_SOC_ATMEL_SAM3X_PLLA_MULA

*(No prompt -- not directly user assignable.)*

Type: ``hex``

Help
====

.. code-block:: none

    This is the multiplier (MULA) used by the PLL.
    The processor clock is (MAINCK * (MULA + 1) / DIVA).

    Board config file can override this settings
    for a particular board.

    With default of MULA == 6, and DIVA == 1,
    PLL is running at 7 times of main clock.

Direct dependencies
===================

\ :option:`SOC_SERIES_SAM3X <CONFIG_SOC_SERIES_SAM3X>` && \ :option:`SOC_FAMILY_SAM <CONFIG_SOC_FAMILY_SAM>`

*(Includes any dependencies from ifs and menus.)*

Default
=======

- 0x06

Kconfig definition
==================



At ``<Zephyr SoC>/arm/atmel_sam/sam3x/Kconfig.soc:54``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:28`` → ``<Zephyr SoC>/Kconfig:11`` → ``<BuildDir>/kconfig/Kconfig.soc.arch:2`` → ``<Zephyr SoC>/arm/atmel_sam/Kconfig:17``

Menu path: (Top) → Hardware Configuration

.. code-block:: kconfig

    config SOC_ATMEL_SAM3X_PLLA_MULA
    	hex
    	default 0x06
    	depends on SOC_SERIES_SAM3X && SOC_FAMILY_SAM
    	help
    	  This is the multiplier (MULA) used by the PLL.
    	  The processor clock is (MAINCK * (MULA + 1) / DIVA).
	  
    	  Board config file can override this settings
    	  for a particular board.
	  
    	  With default of MULA == 6, and DIVA == 1,
    	  PLL is running at 7 times of main clock.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*