:orphan:

.. title:: CONFIG_NPCX_HEADER_FLASH_SIZE

.. kconfig:: CONFIG_NPCX_HEADER_FLASH_SIZE

CONFIG_NPCX_HEADER_FLASH_SIZE
#############################

*(No prompt -- not directly user assignable.)*

Type: ``int``

Direct dependencies
===================

(\ :kconfig:`NPCX_HEADER <CONFIG_NPCX_HEADER>` && \ :kconfig:`SOC_FAMILY_NPCX <CONFIG_SOC_FAMILY_NPCX>`) || (\ :kconfig:`NPCX_HEADER <CONFIG_NPCX_HEADER>` && \ :kconfig:`SOC_FAMILY_NPCX <CONFIG_SOC_FAMILY_NPCX>`)

*(Includes any dependencies from ifs and menus.)*

Defaults
========

- 1 if \ :kconfig:`NPCX_HEADER_FLASH_SIZE_0P5M_1M <CONFIG_NPCX_HEADER_FLASH_SIZE_0P5M_1M>`
- 2 if \ :kconfig:`NPCX_HEADER_FLASH_SIZE_2M <CONFIG_NPCX_HEADER_FLASH_SIZE_2M>`
- 4 if \ :kconfig:`NPCX_HEADER_FLASH_SIZE_4M <CONFIG_NPCX_HEADER_FLASH_SIZE_4M>`
- 8 if \ :kconfig:`NPCX_HEADER_FLASH_SIZE_8M <CONFIG_NPCX_HEADER_FLASH_SIZE_8M>`
- 16 if \ :kconfig:`NPCX_HEADER_FLASH_SIZE_16M <CONFIG_NPCX_HEADER_FLASH_SIZE_16M>`
- 1 if \ :kconfig:`NPCX_HEADER_FLASH_SIZE_0P5M_1M <CONFIG_NPCX_HEADER_FLASH_SIZE_0P5M_1M>`
- 2 if \ :kconfig:`NPCX_HEADER_FLASH_SIZE_2M <CONFIG_NPCX_HEADER_FLASH_SIZE_2M>`
- 4 if \ :kconfig:`NPCX_HEADER_FLASH_SIZE_4M <CONFIG_NPCX_HEADER_FLASH_SIZE_4M>`
- 8 if \ :kconfig:`NPCX_HEADER_FLASH_SIZE_8M <CONFIG_NPCX_HEADER_FLASH_SIZE_8M>`
- 16 if \ :kconfig:`NPCX_HEADER_FLASH_SIZE_16M <CONFIG_NPCX_HEADER_FLASH_SIZE_16M>`

Kconfig definitions
===================



At ``<Zephyr SoC>/arm/nuvoton_npcx/Kconfig:172``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:15`` → ``<BuildDir>/kconfig/Kconfig.soc.arch:2``

Menu path: (Top) → Hardware Configuration → Enable the output binary with NPCX binary header

.. code-block:: kconfig

    config NPCX_HEADER_FLASH_SIZE
    	int
    	default 1 if NPCX_HEADER_FLASH_SIZE_0P5M_1M
    	default 2 if NPCX_HEADER_FLASH_SIZE_2M
    	default 4 if NPCX_HEADER_FLASH_SIZE_4M
    	default 8 if NPCX_HEADER_FLASH_SIZE_8M
    	default 16 if NPCX_HEADER_FLASH_SIZE_16M
    	depends on NPCX_HEADER && SOC_FAMILY_NPCX

----

At ``<Zephyr SoC>/arm/nuvoton_npcx/Kconfig:172``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:18``

Menu path: (Top) → Hardware Configuration → Enable the output binary with NPCX binary header

.. code-block:: kconfig

    config NPCX_HEADER_FLASH_SIZE
    	int
    	default 1 if NPCX_HEADER_FLASH_SIZE_0P5M_1M
    	default 2 if NPCX_HEADER_FLASH_SIZE_2M
    	default 4 if NPCX_HEADER_FLASH_SIZE_4M
    	default 8 if NPCX_HEADER_FLASH_SIZE_8M
    	default 16 if NPCX_HEADER_FLASH_SIZE_16M
    	depends on NPCX_HEADER && SOC_FAMILY_NPCX

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*