nordic,nrf-i2s

Vendor: Nordic Semiconductor

Description

These nodes are “i2s” bus nodes.

Nordic I2S (Inter-IC sound interface)

Properties

Node specific properties

Properties not inherited from the base binding file.

Name

Type

Details

sck-pin

int

 
SCK pin

This property is required.

lrck-pin

int

 
LRCK pin

This property is required.

sdout-pin

int

 
SDOUT pin

sdin-pin

int

 
SDIN pin

mck-pin

int

 
MCK pin

clock-source

string

 
Clock source to be used by the I2S peripheral for the master clock
(MCK) generator. The generator is only needed when the I2S peripheral
is operating in Master mode. The following options are available:
- "PCLK32M": 32 MHz peripheral clock, synchronous to HFCLK
- "PCLK32M_HFXO": PCLK32M running off the 32 MHz crystal oscillator
  (HFXO) for better clock accuracy and jitter performance
- "ACLK": Audio PLL clock with configurable frequency (frequency for
  this clock must be set via the "hfclkaudio-frequency" property
  in the "nordic,nrf-clock" node); this clock source is only available
  in the nRF53 Series SoCs and it requires the use of HFXO

Default value: PCLK32M_HFXO

Legal values: 'PCLK32M', 'PCLK32M_HFXO', 'ACLK'

Deprecated node specific properties

Deprecated properties not inherited from the base binding file.

(None)

Base properties

Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “nordic,nrf-i2s” compatible.

Name

Type

Details

reg

array

 
register space

This property is required.

See Important properties for more information.

interrupts

array

 
interrupts for device

This property is required.

See Important properties for more information.

#address-cells

int

 
number of address cells in reg property

This property is required.

Constant value: 1

#size-cells

int

 
number of size cells in reg property

This property is required.

label

string

 
Human readable string describing the device (used as device_get_binding() argument)

This property is required.

See Important properties for more information.

status

string

 
indicates the operational status of a device

Legal values: 'ok', 'okay', 'disabled', 'reserved', 'fail', 'fail-sss'

See Important properties for more information.

compatible

string-array

 
compatible strings

This property is required.

See Important properties for more information.

reg-names

string-array

 
name of each register space

interrupts-extended

compound

 
extended interrupt specifier for device

interrupt-names

string-array

 
name of each interrupt

interrupt-parent

phandle

 
phandle to interrupt controller node

clocks

phandle-array

 
Clock gate information

clock-names

string-array

 
name of each clock

dmas

phandle-array

 
DMA channels specifiers

dma-names

string-array

 
Provided names of DMA channel specifiers

io-channels

phandle-array

 
IO channels specifiers

io-channel-names

string-array

 
Provided names of IO channel specifiers

wakeup-source

boolean

 
Property to identify that a device can be used as wake up source.

When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.

Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.