:orphan:

.. title:: CONFIG_BOARD_ARDUINO_NANO_33_BLE_EN_USB_CONSOLE

.. kconfig:: CONFIG_BOARD_ARDUINO_NANO_33_BLE_EN_USB_CONSOLE

CONFIG_BOARD_ARDUINO_NANO_33_BLE_EN_USB_CONSOLE
###############################################

*Sends the console output over the USB port*

Type: ``bool``

Direct dependencies
===================

\ :kconfig:`BOARD_ARDUINO_NANO_33_BLE <CONFIG_BOARD_ARDUINO_NANO_33_BLE>` && \ :ref:`<choice: Board Selection> <choice_35>`

*(Includes any dependencies from ifs and menus.)*

Defaults
========

No defaults. Implicitly defaults to ``n``.

Symbols selected by this symbol
===============================

- \ :kconfig:`SERIAL <CONFIG_SERIAL>`
- \ :kconfig:`USB_DEVICE_STACK <CONFIG_USB_DEVICE_STACK>`
- \ :kconfig:`CONSOLE <CONFIG_CONSOLE>`
- \ :kconfig:`PRINTK <CONFIG_PRINTK>`
- \ :kconfig:`UART_INTERRUPT_DRIVEN <CONFIG_UART_INTERRUPT_DRIVEN>`
- \ :kconfig:`USB_UART_CONSOLE <CONFIG_USB_UART_CONSOLE>`

Kconfig definition
==================



At ``<Zephyr Boards>/arm/arduino_nano_33_ble/Kconfig.board:8``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:37`` → ``<Zephyr Boards>/Kconfig:29``

Menu path: (Top) → Board Selection → Arduino Nano 33 BLE board

.. code-block:: kconfig

    config BOARD_ARDUINO_NANO_33_BLE_EN_USB_CONSOLE
    	bool "Sends the console output over the USB port"
    	select SERIAL
    	select USB_DEVICE_STACK
    	select CONSOLE
    	select PRINTK
    	select UART_INTERRUPT_DRIVEN
    	select USB_UART_CONSOLE
    	depends on BOARD_ARDUINO_NANO_33_BLE && <choice>

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*