:orphan:

.. title:: CONFIG_CLOCK_STM32_HSI_DIVISOR

.. kconfig:: CONFIG_CLOCK_STM32_HSI_DIVISOR

CONFIG_CLOCK_STM32_HSI_DIVISOR
##############################

*HSI Divisor*

Type: ``int``

Help
====

.. code-block:: none

    HSI Divisor to divide HSI base frequency value
    allowed values: 1, 2, 4, 8

Direct dependencies
===================

(\ :kconfig:`CLOCK_STM32_PLL_SRC_HSI <CONFIG_CLOCK_STM32_PLL_SRC_HSI>` || \ :kconfig:`CLOCK_STM32_SYSCLK_SRC_HSI <CONFIG_CLOCK_STM32_SYSCLK_SRC_HSI>`) && \ :kconfig:`SOC_SERIES_STM32H7X <CONFIG_SOC_SERIES_STM32H7X>` && !\ :kconfig:`CLOCK_CONTROL_STM32_HAS_DTS <CONFIG_CLOCK_CONTROL_STM32_HAS_DTS>` && !\ :kconfig:`SOC_SERIES_STM32MP1X <CONFIG_SOC_SERIES_STM32MP1X>` && \ :kconfig:`CLOCK_CONTROL_STM32_CUBE <CONFIG_CLOCK_CONTROL_STM32_CUBE>` && \ :kconfig:`CLOCK_CONTROL <CONFIG_CLOCK_CONTROL>`

*(Includes any dependencies from ifs and menus.)*

Default
=======

- 1

Kconfig definition
==================



At ``<Zephyr Driver>/clock_control/Kconfig.stm32h7:10``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:42`` → ``<Zephyr Driver>/Kconfig:56`` → ``<Zephyr Driver>/clock_control/Kconfig:25`` → ``<Zephyr Driver>/clock_control/Kconfig.stm32:153``

Menu path: (Top) → Device Drivers → Hardware clock controller support → STM32 Reset & Clock Control

.. code-block:: kconfig

    config CLOCK_STM32_HSI_DIVISOR
    	int "HSI Divisor"
    	range 1 8
    	default 1
    	depends on (CLOCK_STM32_PLL_SRC_HSI || CLOCK_STM32_SYSCLK_SRC_HSI) && SOC_SERIES_STM32H7X && !CLOCK_CONTROL_STM32_HAS_DTS && !SOC_SERIES_STM32MP1X && CLOCK_CONTROL_STM32_CUBE && CLOCK_CONTROL
    	help
    	  HSI Divisor to divide HSI base frequency value
    	  allowed values: 1, 2, 4, 8

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*