:orphan:

.. title:: CONFIG_FXOS8700

.. kconfig:: CONFIG_FXOS8700

CONFIG_FXOS8700
###############

*FXOS8700 accelerometer/magnetometer driver*

Type: ``bool``

Help
====

.. code-block:: none

    Enable driver for the FXOS8700 accelerometer/magnetometer.
    The driver also supports MMA8451Q, MMA8652FC and MMA8653FC
    accelerometers. If the driver is used with one of these
    accelerometers then the Accelerometer-only mode should be selected."

Direct dependencies
===================

\ :kconfig:`I2C <CONFIG_I2C>` && \ :kconfig:`HAS_DTS_GPIO <CONFIG_HAS_DTS_GPIO>` && \ :kconfig:`SENSOR <CONFIG_SENSOR>`

*(Includes any dependencies from ifs and menus.)*

Defaults
========

No defaults. Implicitly defaults to ``n``.

Kconfig definition
==================



At ``<Zephyr Driver>/sensor/fxos8700/Kconfig:6``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:42`` → ``<Zephyr Driver>/Kconfig:64`` → ``<Zephyr Driver>/sensor/Kconfig:89``

Menu path: (Top) → Device Drivers → Sensor Drivers

.. code-block:: kconfig

    menuconfig FXOS8700
    	bool "FXOS8700 accelerometer/magnetometer driver"
    	depends on I2C && HAS_DTS_GPIO && SENSOR
    	help
    	  Enable driver for the FXOS8700 accelerometer/magnetometer.
    	  The driver also supports MMA8451Q, MMA8652FC and MMA8653FC
    	  accelerometers. If the driver is used with one of these
    	  accelerometers then the Accelerometer-only mode should be selected."

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*