:orphan:

.. title:: CONFIG_GPIO_CMSDK_AHB

.. kconfig:: CONFIG_GPIO_CMSDK_AHB

CONFIG_GPIO_CMSDK_AHB
#####################

*ARM CMSDK (Cortex-M System Design Kit) AHB GPIO Controllers*

Type: ``bool``

Help
====

.. code-block:: none

    Enable config options to support the ARM CMSDK GPIO controllers.

    Says n if not sure.

Direct dependencies
===================

(\ :kconfig:`GPIO <CONFIG_GPIO>` && \ :kconfig:`BOARD_MPS2_AN385 <CONFIG_BOARD_MPS2_AN385>`) || (\ :kconfig:`GPIO <CONFIG_GPIO>` && (\ :kconfig:`BOARD_MPS2_AN521_CPU0 <CONFIG_BOARD_MPS2_AN521_CPU0>` || \ :kconfig:`BOARD_MPS2_AN521_CPU0_NS <CONFIG_BOARD_MPS2_AN521_CPU0_NS>` || \ :kconfig:`BOARD_MPS2_AN521_CPU1 <CONFIG_BOARD_MPS2_AN521_CPU1>`)) || (\ :kconfig:`GPIO <CONFIG_GPIO>` && \ :kconfig:`BOARD_MPS3_AN547 <CONFIG_BOARD_MPS3_AN547>`) || (\ :kconfig:`GPIO <CONFIG_GPIO>` && \ :kconfig:`BOARD_V2M_BEETLE <CONFIG_BOARD_V2M_BEETLE>`) || (\ :kconfig:`GPIO <CONFIG_GPIO>` && \ :kconfig:`BOARD_MUSCA_B1 <CONFIG_BOARD_MUSCA_B1>`) || (\ :kconfig:`GPIO <CONFIG_GPIO>` && \ :kconfig:`BOARD_MUSCA_S1 <CONFIG_BOARD_MUSCA_S1>`) || (\ :kconfig:`SOC_FAMILY_ARM <CONFIG_SOC_FAMILY_ARM>` && \ :kconfig:`GPIO <CONFIG_GPIO>`)

*(Includes any dependencies from ifs and menus.)*

Defaults
========

- y
- y
- y
- y
- y
- y

Kconfig definitions
===================



At ``<Zephyr Boards>/arm/mps2_an385/Kconfig.defconfig:11``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:22``

Menu path: (Top)

.. code-block:: kconfig

    config GPIO_CMSDK_AHB
    	bool
    	default y
    	depends on GPIO && BOARD_MPS2_AN385

----

At ``<Zephyr Boards>/arm/mps2_an521/Kconfig.defconfig:27``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:22``

Menu path: (Top)

.. code-block:: kconfig

    config GPIO_CMSDK_AHB
    	bool
    	default y
    	depends on GPIO && (BOARD_MPS2_AN521_CPU0 || BOARD_MPS2_AN521_CPU0_NS || BOARD_MPS2_AN521_CPU1)

----

At ``<Zephyr Boards>/arm/mps3_an547/Kconfig.defconfig:19``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:22``

Menu path: (Top)

.. code-block:: kconfig

    config GPIO_CMSDK_AHB
    	bool
    	default y
    	depends on GPIO && BOARD_MPS3_AN547

----

At ``<Zephyr Boards>/arm/v2m_beetle/Kconfig.defconfig:13``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:22``

Menu path: (Top)

.. code-block:: kconfig

    config GPIO_CMSDK_AHB
    	bool
    	default y
    	depends on GPIO && BOARD_V2M_BEETLE

----

At ``<Zephyr Boards>/arm/v2m_musca_b1/Kconfig.defconfig:12``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:22``

Menu path: (Top)

.. code-block:: kconfig

    config GPIO_CMSDK_AHB
    	bool
    	default y
    	depends on GPIO && BOARD_MUSCA_B1

----

At ``<Zephyr Boards>/arm/v2m_musca_s1/Kconfig.defconfig:12``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:22``

Menu path: (Top)

.. code-block:: kconfig

    config GPIO_CMSDK_AHB
    	bool
    	default y
    	depends on GPIO && BOARD_MUSCA_S1

----

At ``<Zephyr Driver>/gpio/Kconfig.cmsdk_ahb:6``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:42`` → ``<Zephyr Driver>/Kconfig:36`` → ``<Zephyr Driver>/gpio/Kconfig:44``

Menu path: (Top) → Device Drivers → GPIO Drivers

.. code-block:: kconfig

    config GPIO_CMSDK_AHB
    	bool "ARM CMSDK (Cortex-M System Design Kit) AHB GPIO Controllers"
    	depends on SOC_FAMILY_ARM && GPIO
    	help
    	  Enable config options to support the ARM CMSDK GPIO controllers.
	  
    	  Says n if not sure.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*