:orphan:

.. title:: CONFIG_GPIO_SAM

.. kconfig:: CONFIG_GPIO_SAM

CONFIG_GPIO_SAM
###############

*Atmel SAM GPIO (PORT) driver*

Type: ``bool``

Help
====

.. code-block:: none

    Enable support for the Atmel SAM 'PORT' GPIO controllers.

Direct dependencies
===================

(\ :kconfig:`GPIO <CONFIG_GPIO>` && \ :kconfig:`BOARD_ARDUINO_DUE <CONFIG_BOARD_ARDUINO_DUE>`) || (\ :kconfig:`GPIO <CONFIG_GPIO>` && \ :kconfig:`SOC_SERIES_SAM4E <CONFIG_SOC_SERIES_SAM4E>`) || (\ :kconfig:`GPIO <CONFIG_GPIO>` && \ :kconfig:`SOC_SERIES_SAM4S <CONFIG_SOC_SERIES_SAM4S>`) || (\ :kconfig:`GPIO <CONFIG_GPIO>` && \ :kconfig:`SOC_SERIES_SAME70 <CONFIG_SOC_SERIES_SAME70>`) || (\ :kconfig:`GPIO <CONFIG_GPIO>` && \ :kconfig:`SOC_SERIES_SAMV71 <CONFIG_SOC_SERIES_SAMV71>`) || (\ :kconfig:`GPIO <CONFIG_GPIO>` && \ :kconfig:`SOC_SERIES_SAM4E <CONFIG_SOC_SERIES_SAM4E>`) || (\ :kconfig:`GPIO <CONFIG_GPIO>` && \ :kconfig:`SOC_SERIES_SAM4S <CONFIG_SOC_SERIES_SAM4S>`) || (\ :kconfig:`GPIO <CONFIG_GPIO>` && \ :kconfig:`SOC_SERIES_SAME70 <CONFIG_SOC_SERIES_SAME70>`) || (\ :kconfig:`GPIO <CONFIG_GPIO>` && \ :kconfig:`SOC_SERIES_SAMV71 <CONFIG_SOC_SERIES_SAMV71>`) || (\ :kconfig:`SOC_FAMILY_SAM <CONFIG_SOC_FAMILY_SAM>` && !\ :kconfig:`SOC_SERIES_SAM4L <CONFIG_SOC_SERIES_SAM4L>` && \ :kconfig:`GPIO <CONFIG_GPIO>`)

*(Includes any dependencies from ifs and menus.)*

Defaults
========

- y
- y
- y
- y
- y
- y
- y
- y
- y
- y

Kconfig definitions
===================



At ``<Zephyr Boards>/arm/arduino_due/Kconfig.defconfig:11``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:22``

Menu path: (Top)

.. code-block:: kconfig

    config GPIO_SAM
    	bool
    	default y
    	depends on GPIO && BOARD_ARDUINO_DUE

----

At ``<Zephyr SoC>/arm/atmel_sam/sam4e/Kconfig.defconfig.series:26``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:25`` → ``<BuildDir>/kconfig/Kconfig.soc.defconfig:1`` → ``<Zephyr SoC>/arm/atmel_sam/Kconfig.defconfig:6``

Menu path: (Top)

.. code-block:: kconfig

    config GPIO_SAM
    	bool
    	default y
    	depends on GPIO && SOC_SERIES_SAM4E

----

At ``<Zephyr SoC>/arm/atmel_sam/sam4s/Kconfig.defconfig.series:31``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:25`` → ``<BuildDir>/kconfig/Kconfig.soc.defconfig:1`` → ``<Zephyr SoC>/arm/atmel_sam/Kconfig.defconfig:6``

Menu path: (Top)

.. code-block:: kconfig

    config GPIO_SAM
    	bool
    	default y
    	depends on GPIO && SOC_SERIES_SAM4S

----

At ``<Zephyr SoC>/arm/atmel_sam/same70/Kconfig.defconfig.series:48``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:25`` → ``<BuildDir>/kconfig/Kconfig.soc.defconfig:1`` → ``<Zephyr SoC>/arm/atmel_sam/Kconfig.defconfig:6``

Menu path: (Top)

.. code-block:: kconfig

    config GPIO_SAM
    	bool
    	default y
    	depends on GPIO && SOC_SERIES_SAME70

----

At ``<Zephyr SoC>/arm/atmel_sam/samv71/Kconfig.defconfig.series:49``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:25`` → ``<BuildDir>/kconfig/Kconfig.soc.defconfig:1`` → ``<Zephyr SoC>/arm/atmel_sam/Kconfig.defconfig:6``

Menu path: (Top)

.. code-block:: kconfig

    config GPIO_SAM
    	bool
    	default y
    	depends on GPIO && SOC_SERIES_SAMV71

----

At ``<Zephyr SoC>/arm/atmel_sam/sam4e/Kconfig.defconfig.series:26``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:27`` → ``<Zephyr SoC>/arm/atmel_sam/Kconfig.defconfig:6``

Menu path: (Top)

.. code-block:: kconfig

    config GPIO_SAM
    	bool
    	default y
    	depends on GPIO && SOC_SERIES_SAM4E

----

At ``<Zephyr SoC>/arm/atmel_sam/sam4s/Kconfig.defconfig.series:31``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:27`` → ``<Zephyr SoC>/arm/atmel_sam/Kconfig.defconfig:6``

Menu path: (Top)

.. code-block:: kconfig

    config GPIO_SAM
    	bool
    	default y
    	depends on GPIO && SOC_SERIES_SAM4S

----

At ``<Zephyr SoC>/arm/atmel_sam/same70/Kconfig.defconfig.series:48``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:27`` → ``<Zephyr SoC>/arm/atmel_sam/Kconfig.defconfig:6``

Menu path: (Top)

.. code-block:: kconfig

    config GPIO_SAM
    	bool
    	default y
    	depends on GPIO && SOC_SERIES_SAME70

----

At ``<Zephyr SoC>/arm/atmel_sam/samv71/Kconfig.defconfig.series:49``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:27`` → ``<Zephyr SoC>/arm/atmel_sam/Kconfig.defconfig:6``

Menu path: (Top)

.. code-block:: kconfig

    config GPIO_SAM
    	bool
    	default y
    	depends on GPIO && SOC_SERIES_SAMV71

----

At ``<Zephyr Driver>/gpio/Kconfig.sam:7``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:42`` → ``<Zephyr Driver>/Kconfig:36`` → ``<Zephyr Driver>/gpio/Kconfig:58``

Menu path: (Top) → Device Drivers → GPIO Drivers

.. code-block:: kconfig

    config GPIO_SAM
    	bool "Atmel SAM GPIO (PORT) driver"
    	default y
    	depends on SOC_FAMILY_SAM && !SOC_SERIES_SAM4L && GPIO
    	help
    	  Enable support for the Atmel SAM 'PORT' GPIO controllers.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*