:orphan:

.. title:: CONFIG_HAS_SEGGER_RTT

.. kconfig:: CONFIG_HAS_SEGGER_RTT

CONFIG_HAS_SEGGER_RTT
#####################

*(No prompt -- not directly user assignable.)*

Type: ``bool``

Help
====

.. code-block:: none

    Indicates that the platform supports SEGGER J-Link RTT.

Defaults
========

No defaults. Implicitly defaults to ``n``.

Symbols that select this symbol
===============================

- \ :kconfig:`SOC_SERIES_NRF51X <CONFIG_SOC_SERIES_NRF51X>`
- \ :kconfig:`SOC_SERIES_NRF52X <CONFIG_SOC_SERIES_NRF52X>`
- \ :kconfig:`SOC_SERIES_NRF53X <CONFIG_SOC_SERIES_NRF53X>`
- \ :kconfig:`SOC_SERIES_NRF91X <CONFIG_SOC_SERIES_NRF91X>`
- \ :kconfig:`SOC_SERIES_NRF51X <CONFIG_SOC_SERIES_NRF51X>`
- \ :kconfig:`SOC_SERIES_NRF52X <CONFIG_SOC_SERIES_NRF52X>`
- \ :kconfig:`SOC_SERIES_NRF53X <CONFIG_SOC_SERIES_NRF53X>`
- \ :kconfig:`SOC_SERIES_NRF91X <CONFIG_SOC_SERIES_NRF91X>`
- \ :kconfig:`SOC_ARM_DESIGNSTART_FPGA_CORTEX_M1 <CONFIG_SOC_ARM_DESIGNSTART_FPGA_CORTEX_M1>`
- \ :kconfig:`SOC_ARM_DESIGNSTART_FPGA_CORTEX_M3 <CONFIG_SOC_ARM_DESIGNSTART_FPGA_CORTEX_M3>`
- \ :kconfig:`SOC_FAMILY_SAM <CONFIG_SOC_FAMILY_SAM>`
- \ :kconfig:`SOC_FAMILY_SAM0 <CONFIG_SOC_FAMILY_SAM0>`
- \ :kconfig:`SOC_FAMILY_XMC <CONFIG_SOC_FAMILY_XMC>`
- \ :kconfig:`SOC_FAMILY_IMX <CONFIG_SOC_FAMILY_IMX>`
- \ :kconfig:`SOC_FAMILY_KINETIS <CONFIG_SOC_FAMILY_KINETIS>`
- \ :kconfig:`SOC_FAMILY_LPC <CONFIG_SOC_FAMILY_LPC>`
- \ :kconfig:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`
- \ :kconfig:`SOC_FAMILY_STM32 <CONFIG_SOC_FAMILY_STM32>`
- \ :kconfig:`SOC_ARM_DESIGNSTART_FPGA_CORTEX_M1 <CONFIG_SOC_ARM_DESIGNSTART_FPGA_CORTEX_M1>`
- \ :kconfig:`SOC_ARM_DESIGNSTART_FPGA_CORTEX_M3 <CONFIG_SOC_ARM_DESIGNSTART_FPGA_CORTEX_M3>`
- \ :kconfig:`SOC_FAMILY_SAM <CONFIG_SOC_FAMILY_SAM>`
- \ :kconfig:`SOC_FAMILY_SAM0 <CONFIG_SOC_FAMILY_SAM0>`
- \ :kconfig:`SOC_FAMILY_XMC <CONFIG_SOC_FAMILY_XMC>`
- \ :kconfig:`SOC_FAMILY_IMX <CONFIG_SOC_FAMILY_IMX>`
- \ :kconfig:`SOC_FAMILY_KINETIS <CONFIG_SOC_FAMILY_KINETIS>`
- \ :kconfig:`SOC_FAMILY_LPC <CONFIG_SOC_FAMILY_LPC>`
- \ :kconfig:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`
- \ :kconfig:`SOC_FAMILY_STM32 <CONFIG_SOC_FAMILY_STM32>`

Kconfig definition
==================



At ``<Zephyr Driver>/debug/Kconfig.rtt:4``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:42`` → ``<Zephyr Driver>/Kconfig:16`` → ``<Zephyr Driver>/debug/Kconfig:4``

Menu path: (Top) → Device Drivers

.. code-block:: kconfig

    config HAS_SEGGER_RTT
    	bool
    	help
    	  Indicates that the platform supports SEGGER J-Link RTT.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*