:orphan:

.. title:: CONFIG_KINETIS_FLASH_CONFIG_FEPROT

.. kconfig:: CONFIG_KINETIS_FLASH_CONFIG_FEPROT

CONFIG_KINETIS_FLASH_CONFIG_FEPROT
##################################

*EEPROM protection byte (FEPROT)*

*EEPROM protection byte (FEPROT)*

Type: ``hex``

Help
====

.. code-block:: none

    Configures the reset value of the FEPROT register for FlexNVM
    devices. For program flash only devices, this byte is reserved.

Help
====

.. code-block:: none

    Configures the reset value of the FEPROT register for FlexNVM
    devices. For program flash only devices, this byte is reserved.

Direct dependencies
===================

(\ :kconfig:`KINETIS_FLASH_CONFIG <CONFIG_KINETIS_FLASH_CONFIG>` && \ :kconfig:`SOC_FAMILY_KINETIS <CONFIG_SOC_FAMILY_KINETIS>`) || (\ :kconfig:`KINETIS_FLASH_CONFIG <CONFIG_KINETIS_FLASH_CONFIG>` && \ :kconfig:`SOC_FAMILY_KINETIS <CONFIG_SOC_FAMILY_KINETIS>`)

*(Includes any dependencies from ifs and menus.)*

Defaults
========

- 0xff
- 0xff

Kconfig definitions
===================



At ``<Zephyr SoC>/arm/nxp_kinetis/Kconfig:136``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:15`` → ``<BuildDir>/kconfig/Kconfig.soc.arch:2``

Menu path: (Top) → Hardware Configuration → Kinetis flash configuration field

.. code-block:: kconfig

    config KINETIS_FLASH_CONFIG_FEPROT
    	hex "EEPROM protection byte (FEPROT)"
    	range 0 0xff
    	default 0xff
    	depends on KINETIS_FLASH_CONFIG && SOC_FAMILY_KINETIS
    	help
    	  Configures the reset value of the FEPROT register for FlexNVM
    	  devices. For program flash only devices, this byte is reserved.

----

At ``<Zephyr SoC>/arm/nxp_kinetis/Kconfig:136``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:18``

Menu path: (Top) → Hardware Configuration → Kinetis flash configuration field

.. code-block:: kconfig

    config KINETIS_FLASH_CONFIG_FEPROT
    	hex "EEPROM protection byte (FEPROT)"
    	range 0 0xff
    	default 0xff
    	depends on KINETIS_FLASH_CONFIG && SOC_FAMILY_KINETIS
    	help
    	  Configures the reset value of the FEPROT register for FlexNVM
    	  devices. For program flash only devices, this byte is reserved.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*