:orphan:

.. title:: CONFIG_LEUART_GECKO

.. kconfig:: CONFIG_LEUART_GECKO

CONFIG_LEUART_GECKO
###################

*Gecko leuart driver*

Type: ``bool``

Help
====

.. code-block:: none

    Enable the Gecko leuart driver.

Direct dependencies
===================

\ :kconfig:`BOARD_EFM32GG_SLWSTK6121A <CONFIG_BOARD_EFM32GG_SLWSTK6121A>` || (\ :kconfig:`SERIAL <CONFIG_SERIAL>` && \ :kconfig:`SOC_SERIES_EFM32GG11B <CONFIG_SOC_SERIES_EFM32GG11B>` && \ :kconfig:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`) || (\ :kconfig:`SERIAL <CONFIG_SERIAL>` && \ :kconfig:`SOC_SERIES_EFM32JG12B <CONFIG_SOC_SERIES_EFM32JG12B>` && \ :kconfig:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`) || (\ :kconfig:`SERIAL <CONFIG_SERIAL>` && \ :kconfig:`SOC_SERIES_EFM32PG12B <CONFIG_SOC_SERIES_EFM32PG12B>` && \ :kconfig:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`) || (\ :kconfig:`SERIAL <CONFIG_SERIAL>` && \ :kconfig:`SOC_SERIES_EFM32PG1B <CONFIG_SOC_SERIES_EFM32PG1B>` && \ :kconfig:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`) || (\ :kconfig:`SERIAL <CONFIG_SERIAL>` && \ :kconfig:`SOC_SERIES_EFR32MG12P <CONFIG_SOC_SERIES_EFR32MG12P>` && \ :kconfig:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`) || (\ :kconfig:`SERIAL <CONFIG_SERIAL>` && \ :kconfig:`SOC_SERIES_EFM32GG11B <CONFIG_SOC_SERIES_EFM32GG11B>` && \ :kconfig:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`) || (\ :kconfig:`SERIAL <CONFIG_SERIAL>` && \ :kconfig:`SOC_SERIES_EFM32JG12B <CONFIG_SOC_SERIES_EFM32JG12B>` && \ :kconfig:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`) || (\ :kconfig:`SERIAL <CONFIG_SERIAL>` && \ :kconfig:`SOC_SERIES_EFM32PG12B <CONFIG_SOC_SERIES_EFM32PG12B>` && \ :kconfig:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`) || (\ :kconfig:`SERIAL <CONFIG_SERIAL>` && \ :kconfig:`SOC_SERIES_EFM32PG1B <CONFIG_SOC_SERIES_EFM32PG1B>` && \ :kconfig:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`) || (\ :kconfig:`SERIAL <CONFIG_SERIAL>` && \ :kconfig:`SOC_SERIES_EFR32MG12P <CONFIG_SOC_SERIES_EFR32MG12P>` && \ :kconfig:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`) || (\ :kconfig:`HAS_SILABS_GECKO <CONFIG_HAS_SILABS_GECKO>` && \ :kconfig:`GPIO_GECKO <CONFIG_GPIO_GECKO>` && \ :kconfig:`SERIAL <CONFIG_SERIAL>`)

*(Includes any dependencies from ifs and menus.)*

Defaults
========

- n
- y
- y
- y
- y
- y
- y
- y
- y
- y
- y

Symbols selected by this symbol
===============================

- \ :kconfig:`SERIAL_HAS_DRIVER <CONFIG_SERIAL_HAS_DRIVER>`
- \ :kconfig:`SERIAL_SUPPORT_INTERRUPT <CONFIG_SERIAL_SUPPORT_INTERRUPT>`
- \ :kconfig:`SOC_GECKO_LEUART <CONFIG_SOC_GECKO_LEUART>`

Kconfig definitions
===================



At ``<Zephyr Boards>/arm/efm32gg_slwstk6121a/Kconfig.defconfig:26``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:22``

Menu path: (Top)

.. code-block:: kconfig

    config LEUART_GECKO
    	bool
    	default n
    	depends on BOARD_EFM32GG_SLWSTK6121A

----

At ``<Zephyr SoC>/arm/silabs_exx32/efm32gg11b/Kconfig.defconfig.efm32gg11b:15``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:25`` → ``<BuildDir>/kconfig/Kconfig.soc.defconfig:1`` → ``<Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5`` → ``<Zephyr SoC>/arm/silabs_exx32/efm32gg11b/Kconfig.defconfig.series:20``

Menu path: (Top)

.. code-block:: kconfig

    config LEUART_GECKO
    	bool
    	default y
    	depends on SERIAL && SOC_SERIES_EFM32GG11B && SOC_FAMILY_EXX32

----

At ``<Zephyr SoC>/arm/silabs_exx32/efm32jg12b/Kconfig.defconfig.efm32jg12b:15``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:25`` → ``<BuildDir>/kconfig/Kconfig.soc.defconfig:1`` → ``<Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5`` → ``<Zephyr SoC>/arm/silabs_exx32/efm32jg12b/Kconfig.defconfig.series:18``

Menu path: (Top)

.. code-block:: kconfig

    config LEUART_GECKO
    	bool
    	default y
    	depends on SERIAL && SOC_SERIES_EFM32JG12B && SOC_FAMILY_EXX32

----

At ``<Zephyr SoC>/arm/silabs_exx32/efm32pg12b/Kconfig.defconfig.efm32pg12b:15``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:25`` → ``<BuildDir>/kconfig/Kconfig.soc.defconfig:1`` → ``<Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5`` → ``<Zephyr SoC>/arm/silabs_exx32/efm32pg12b/Kconfig.defconfig.series:18``

Menu path: (Top)

.. code-block:: kconfig

    config LEUART_GECKO
    	bool
    	default y
    	depends on SERIAL && SOC_SERIES_EFM32PG12B && SOC_FAMILY_EXX32

----

At ``<Zephyr SoC>/arm/silabs_exx32/efm32pg1b/Kconfig.defconfig.efm32pg1b:15``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:25`` → ``<BuildDir>/kconfig/Kconfig.soc.defconfig:1`` → ``<Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5`` → ``<Zephyr SoC>/arm/silabs_exx32/efm32pg1b/Kconfig.defconfig.series:18``

Menu path: (Top)

.. code-block:: kconfig

    config LEUART_GECKO
    	bool
    	default y
    	depends on SERIAL && SOC_SERIES_EFM32PG1B && SOC_FAMILY_EXX32

----

At ``<Zephyr SoC>/arm/silabs_exx32/efr32mg12p/Kconfig.defconfig.efr32mg12p:15``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:25`` → ``<BuildDir>/kconfig/Kconfig.soc.defconfig:1`` → ``<Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5`` → ``<Zephyr SoC>/arm/silabs_exx32/efr32mg12p/Kconfig.defconfig.series:18``

Menu path: (Top)

.. code-block:: kconfig

    config LEUART_GECKO
    	bool
    	default y
    	depends on SERIAL && SOC_SERIES_EFR32MG12P && SOC_FAMILY_EXX32

----

At ``<Zephyr SoC>/arm/silabs_exx32/efm32gg11b/Kconfig.defconfig.efm32gg11b:15``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:27`` → ``<Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5`` → ``<Zephyr SoC>/arm/silabs_exx32/efm32gg11b/Kconfig.defconfig.series:20``

Menu path: (Top)

.. code-block:: kconfig

    config LEUART_GECKO
    	bool
    	default y
    	depends on SERIAL && SOC_SERIES_EFM32GG11B && SOC_FAMILY_EXX32

----

At ``<Zephyr SoC>/arm/silabs_exx32/efm32jg12b/Kconfig.defconfig.efm32jg12b:15``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:27`` → ``<Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5`` → ``<Zephyr SoC>/arm/silabs_exx32/efm32jg12b/Kconfig.defconfig.series:18``

Menu path: (Top)

.. code-block:: kconfig

    config LEUART_GECKO
    	bool
    	default y
    	depends on SERIAL && SOC_SERIES_EFM32JG12B && SOC_FAMILY_EXX32

----

At ``<Zephyr SoC>/arm/silabs_exx32/efm32pg12b/Kconfig.defconfig.efm32pg12b:15``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:27`` → ``<Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5`` → ``<Zephyr SoC>/arm/silabs_exx32/efm32pg12b/Kconfig.defconfig.series:18``

Menu path: (Top)

.. code-block:: kconfig

    config LEUART_GECKO
    	bool
    	default y
    	depends on SERIAL && SOC_SERIES_EFM32PG12B && SOC_FAMILY_EXX32

----

At ``<Zephyr SoC>/arm/silabs_exx32/efm32pg1b/Kconfig.defconfig.efm32pg1b:15``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:27`` → ``<Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5`` → ``<Zephyr SoC>/arm/silabs_exx32/efm32pg1b/Kconfig.defconfig.series:18``

Menu path: (Top)

.. code-block:: kconfig

    config LEUART_GECKO
    	bool
    	default y
    	depends on SERIAL && SOC_SERIES_EFM32PG1B && SOC_FAMILY_EXX32

----

At ``<Zephyr SoC>/arm/silabs_exx32/efr32mg12p/Kconfig.defconfig.efr32mg12p:15``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:27`` → ``<Zephyr SoC>/arm/silabs_exx32/Kconfig.defconfig:5`` → ``<Zephyr SoC>/arm/silabs_exx32/efr32mg12p/Kconfig.defconfig.series:18``

Menu path: (Top)

.. code-block:: kconfig

    config LEUART_GECKO
    	bool
    	default y
    	depends on SERIAL && SOC_SERIES_EFR32MG12P && SOC_FAMILY_EXX32

----

At ``<Zephyr Driver>/serial/Kconfig.leuart_gecko:6``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:42`` → ``<Zephyr Driver>/Kconfig:26`` → ``<Zephyr Driver>/serial/Kconfig:136``

Menu path: (Top) → Device Drivers → Serial Drivers

.. code-block:: kconfig

    config LEUART_GECKO
    	bool "Gecko leuart driver"
    	select SERIAL_HAS_DRIVER
    	select SERIAL_SUPPORT_INTERRUPT
    	select SOC_GECKO_LEUART
    	depends on HAS_SILABS_GECKO && GPIO_GECKO && SERIAL
    	help
    	  Enable the Gecko leuart driver.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*