:orphan:

.. title:: CONFIG_NPCX_HEADER_SPI_READ_MODE

.. kconfig:: CONFIG_NPCX_HEADER_SPI_READ_MODE

CONFIG_NPCX_HEADER_SPI_READ_MODE
################################

*(No prompt -- not directly user assignable.)*

Type: ``string``

Direct dependencies
===================

(\ :kconfig:`NPCX_HEADER <CONFIG_NPCX_HEADER>` && \ :kconfig:`SOC_FAMILY_NPCX <CONFIG_SOC_FAMILY_NPCX>`) || (\ :kconfig:`NPCX_HEADER <CONFIG_NPCX_HEADER>` && \ :kconfig:`SOC_FAMILY_NPCX <CONFIG_SOC_FAMILY_NPCX>`)

*(Includes any dependencies from ifs and menus.)*

Defaults
========

- "normal" if \ :kconfig:`NPCX_HEADER_SPI_READ_MODE_NORMAL <CONFIG_NPCX_HEADER_SPI_READ_MODE_NORMAL>`
- "fast" if \ :kconfig:`NPCX_HEADER_SPI_READ_MODE_FAST <CONFIG_NPCX_HEADER_SPI_READ_MODE_FAST>`
- "dual" if \ :kconfig:`NPCX_HEADER_SPI_READ_MODE_DUAL <CONFIG_NPCX_HEADER_SPI_READ_MODE_DUAL>`
- "quad" if \ :kconfig:`NPCX_HEADER_SPI_READ_MODE_QUAD <CONFIG_NPCX_HEADER_SPI_READ_MODE_QUAD>`
- "normal" if \ :kconfig:`NPCX_HEADER_SPI_READ_MODE_NORMAL <CONFIG_NPCX_HEADER_SPI_READ_MODE_NORMAL>`
- "fast" if \ :kconfig:`NPCX_HEADER_SPI_READ_MODE_FAST <CONFIG_NPCX_HEADER_SPI_READ_MODE_FAST>`
- "dual" if \ :kconfig:`NPCX_HEADER_SPI_READ_MODE_DUAL <CONFIG_NPCX_HEADER_SPI_READ_MODE_DUAL>`
- "quad" if \ :kconfig:`NPCX_HEADER_SPI_READ_MODE_QUAD <CONFIG_NPCX_HEADER_SPI_READ_MODE_QUAD>`

Kconfig definitions
===================



At ``<Zephyr SoC>/arm/nuvoton_npcx/Kconfig:97``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:15`` → ``<BuildDir>/kconfig/Kconfig.soc.arch:2``

Menu path: (Top) → Hardware Configuration → Enable the output binary with NPCX binary header

.. code-block:: kconfig

    config NPCX_HEADER_SPI_READ_MODE
    	string
    	default "normal" if NPCX_HEADER_SPI_READ_MODE_NORMAL
    	default "fast" if NPCX_HEADER_SPI_READ_MODE_FAST
    	default "dual" if NPCX_HEADER_SPI_READ_MODE_DUAL
    	default "quad" if NPCX_HEADER_SPI_READ_MODE_QUAD
    	depends on NPCX_HEADER && SOC_FAMILY_NPCX

----

At ``<Zephyr SoC>/arm/nuvoton_npcx/Kconfig:97``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:18``

Menu path: (Top) → Hardware Configuration → Enable the output binary with NPCX binary header

.. code-block:: kconfig

    config NPCX_HEADER_SPI_READ_MODE
    	string
    	default "normal" if NPCX_HEADER_SPI_READ_MODE_NORMAL
    	default "fast" if NPCX_HEADER_SPI_READ_MODE_FAST
    	default "dual" if NPCX_HEADER_SPI_READ_MODE_DUAL
    	default "quad" if NPCX_HEADER_SPI_READ_MODE_QUAD
    	depends on NPCX_HEADER && SOC_FAMILY_NPCX

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*