:orphan:

.. title:: CONFIG_NRFX_TIMER2

.. kconfig:: CONFIG_NRFX_TIMER2

CONFIG_NRFX_TIMER2
##################

*Enable TIMER2 instance*

*Enable TIMER2 instance*

Type: ``bool``

Direct dependencies
===================

(\ :kconfig:`HAS_HW_NRF_TIMER2 <CONFIG_HAS_HW_NRF_TIMER2>` && \ :kconfig:`HAS_NRFX <CONFIG_HAS_NRFX>`) || (\ :kconfig:`HAS_HW_NRF_TIMER2 <CONFIG_HAS_HW_NRF_TIMER2>` && \ :kconfig:`HAS_NRFX <CONFIG_HAS_NRFX>` && 0) || ((\ :kconfig:`UART_0_NRF_HW_ASYNC_TIMER <CONFIG_UART_0_NRF_HW_ASYNC_TIMER>` = 2 || \ :kconfig:`UART_1_NRF_HW_ASYNC_TIMER <CONFIG_UART_1_NRF_HW_ASYNC_TIMER>` = 2 || \ :kconfig:`UART_3_NRF_HW_ASYNC_TIMER <CONFIG_UART_3_NRF_HW_ASYNC_TIMER>` = 2 || \ :kconfig:`UART_2_NRF_HW_ASYNC_TIMER <CONFIG_UART_2_NRF_HW_ASYNC_TIMER>` = 2) && \ :kconfig:`UART_NRFX <CONFIG_UART_NRFX>` && \ :kconfig:`SERIAL <CONFIG_SERIAL>`)

*(Includes any dependencies from ifs and menus.)*

Default
=======

- y

Symbols selected by this symbol
===============================

- \ :kconfig:`NRFX_TIMER <CONFIG_NRFX_TIMER>`
- \ :kconfig:`NRFX_TIMER <CONFIG_NRFX_TIMER>`

Symbols that select this symbol
===============================

- \ :kconfig:`NRFX_NFCT <CONFIG_NRFX_NFCT>`
- \ :kconfig:`NRFX_NFCT <CONFIG_NRFX_NFCT>`

Kconfig definitions
===================



At ``<External Modules>/hal_nordic/nrfx/Kconfig:263``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:33`` → ``<External Modules>/Kconfig:6`` → ``<BuildDir>/kconfig/Kconfig.modules:14`` → ``<External Modules>/hal_nordic/Kconfig:217``

Menu path: (Top) → Modules → hal_nordic (/home/runner/work/bridle/bridle/workspace/modules/hal/nordic) → nrfx drivers

.. code-block:: kconfig

    config NRFX_TIMER2
    	bool "Enable TIMER2 instance"
    	select NRFX_TIMER
    	depends on HAS_HW_NRF_TIMER2 && HAS_NRFX

----

At ``<External Modules>/hal_nordic/nrfx/Kconfig:263``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:33`` → ``<External Modules>/Kconfig:74`` → ``<External Modules>/hal_nordic/Kconfig:217``

Menu path: (Top) → Modules → nrfx drivers

.. code-block:: kconfig

    config NRFX_TIMER2
    	bool "Enable TIMER2 instance"
    	select NRFX_TIMER
    	depends on HAS_HW_NRF_TIMER2 && HAS_NRFX && 0

----

At ``<Zephyr Driver>/serial/Kconfig.nrfx:350``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:42`` → ``<Zephyr Driver>/Kconfig:26`` → ``<Zephyr Driver>/serial/Kconfig:116``

Menu path: (Top) → Device Drivers → Serial Drivers → nRF UART nrfx drivers

.. code-block:: kconfig

    config NRFX_TIMER2
    	bool
    	default y
    	depends on (UART_0_NRF_HW_ASYNC_TIMER = 2 || UART_1_NRF_HW_ASYNC_TIMER = 2 || UART_3_NRF_HW_ASYNC_TIMER = 2 || UART_2_NRF_HW_ASYNC_TIMER = 2) && UART_NRFX && SERIAL

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*