:orphan:

.. title:: CONFIG_SOC_ATMEL_SAMD5X_XOSC32K

.. kconfig:: CONFIG_SOC_ATMEL_SAMD5X_XOSC32K

CONFIG_SOC_ATMEL_SAMD5X_XOSC32K
###############################

*Enable the external 32 kHz crystal oscillator*

*Enable the external 32 kHz crystal oscillator*

Type: ``bool``

Help
====

.. code-block:: none

    Say y to enable the external 32 kHZ crystal oscillator at
    startup.  This can then be selected as the main clock source
    for the SOC.

Help
====

.. code-block:: none

    Say y to enable the external 32 kHZ crystal oscillator at
    startup.  This can then be selected as the main clock source
    for the SOC.

Direct dependencies
===================

((\ :kconfig:`SOC_SERIES_SAMD51 <CONFIG_SOC_SERIES_SAMD51>` || \ :kconfig:`SOC_SERIES_SAME51 <CONFIG_SOC_SERIES_SAME51>` || \ :kconfig:`SOC_SERIES_SAME53 <CONFIG_SOC_SERIES_SAME53>` || \ :kconfig:`SOC_SERIES_SAME54 <CONFIG_SOC_SERIES_SAME54>`) && \ :kconfig:`SOC_FAMILY_SAM0 <CONFIG_SOC_FAMILY_SAM0>`) || ((\ :kconfig:`SOC_SERIES_SAMD51 <CONFIG_SOC_SERIES_SAMD51>` || \ :kconfig:`SOC_SERIES_SAME51 <CONFIG_SOC_SERIES_SAME51>` || \ :kconfig:`SOC_SERIES_SAME53 <CONFIG_SOC_SERIES_SAME53>` || \ :kconfig:`SOC_SERIES_SAME54 <CONFIG_SOC_SERIES_SAME54>`) && \ :kconfig:`SOC_FAMILY_SAM0 <CONFIG_SOC_FAMILY_SAM0>`)

*(Includes any dependencies from ifs and menus.)*

Defaults
========

No defaults. Implicitly defaults to ``n``.

Kconfig definitions
===================



At ``<Zephyr SoC>/arm/atmel_sam0/common/Kconfig.samd5x:6``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:15`` → ``<BuildDir>/kconfig/Kconfig.soc.arch:2`` → ``<Zephyr SoC>/arm/atmel_sam0/Kconfig:17``

Menu path: (Top) → Hardware Configuration

.. code-block:: kconfig

    config SOC_ATMEL_SAMD5X_XOSC32K
    	bool "Enable the external 32 kHz crystal oscillator"
    	depends on (SOC_SERIES_SAMD51 || SOC_SERIES_SAME51 || SOC_SERIES_SAME53 || SOC_SERIES_SAME54) && SOC_FAMILY_SAM0
    	help
    	  Say y to enable the external 32 kHZ crystal oscillator at
    	  startup.  This can then be selected as the main clock source
    	  for the SOC.

----

At ``<Zephyr SoC>/arm/atmel_sam0/common/Kconfig.samd5x:6``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:18`` → ``<Zephyr SoC>/arm/atmel_sam0/Kconfig:17``

Menu path: (Top) → Hardware Configuration

.. code-block:: kconfig

    config SOC_ATMEL_SAMD5X_XOSC32K
    	bool "Enable the external 32 kHz crystal oscillator"
    	depends on (SOC_SERIES_SAMD51 || SOC_SERIES_SAME51 || SOC_SERIES_SAME53 || SOC_SERIES_SAME54) && SOC_FAMILY_SAM0
    	help
    	  Say y to enable the external 32 kHZ crystal oscillator at
    	  startup.  This can then be selected as the main clock source
    	  for the SOC.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*