:orphan:

.. title:: CONFIG_SOC_GECKO_HAS_INDIVIDUAL_PIN_LOCATION

.. kconfig:: CONFIG_SOC_GECKO_HAS_INDIVIDUAL_PIN_LOCATION

CONFIG_SOC_GECKO_HAS_INDIVIDUAL_PIN_LOCATION
############################################

*(No prompt -- not directly user assignable.)*

Type: ``bool``

Help
====

.. code-block:: none

    If enabled, indicates that SoC allows to configure individual pin
    locations. This is supported by e.g. efr32fg1p, efr32mg12p series.
    If disabled, indicates that pin locations are configured in groups.
    This is supported by e.g. efm32hg, efm32wg series.

Help
====

.. code-block:: none

    If enabled, indicates that SoC allows to configure individual pin
    locations. This is supported by e.g. efr32fg1p, efr32mg12p series.
    If disabled, indicates that pin locations are configured in groups.
    This is supported by e.g. efm32hg, efm32wg series.

Direct dependencies
===================

\ :kconfig:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>` || \ :kconfig:`SOC_FAMILY_EXX32 <CONFIG_SOC_FAMILY_EXX32>`

*(Includes any dependencies from ifs and menus.)*

Defaults
========

No defaults. Implicitly defaults to ``n``.

Symbols that select this symbol
===============================

- \ :kconfig:`SOC_SERIES_EFM32GG11B <CONFIG_SOC_SERIES_EFM32GG11B>`
- \ :kconfig:`SOC_SERIES_EFM32JG12B <CONFIG_SOC_SERIES_EFM32JG12B>`
- \ :kconfig:`SOC_SERIES_EFM32PG12B <CONFIG_SOC_SERIES_EFM32PG12B>`
- \ :kconfig:`SOC_SERIES_EFM32PG1B <CONFIG_SOC_SERIES_EFM32PG1B>`
- \ :kconfig:`SOC_SERIES_EFR32BG13P <CONFIG_SOC_SERIES_EFR32BG13P>`
- \ :kconfig:`SOC_SERIES_EFR32FG13P <CONFIG_SOC_SERIES_EFR32FG13P>`
- \ :kconfig:`SOC_SERIES_EFR32FG1P <CONFIG_SOC_SERIES_EFR32FG1P>`
- \ :kconfig:`SOC_SERIES_EFR32MG12P <CONFIG_SOC_SERIES_EFR32MG12P>`
- \ :kconfig:`SOC_SERIES_EFM32GG11B <CONFIG_SOC_SERIES_EFM32GG11B>`
- \ :kconfig:`SOC_SERIES_EFM32JG12B <CONFIG_SOC_SERIES_EFM32JG12B>`
- \ :kconfig:`SOC_SERIES_EFM32PG12B <CONFIG_SOC_SERIES_EFM32PG12B>`
- \ :kconfig:`SOC_SERIES_EFM32PG1B <CONFIG_SOC_SERIES_EFM32PG1B>`
- \ :kconfig:`SOC_SERIES_EFR32BG13P <CONFIG_SOC_SERIES_EFR32BG13P>`
- \ :kconfig:`SOC_SERIES_EFR32FG13P <CONFIG_SOC_SERIES_EFR32FG13P>`
- \ :kconfig:`SOC_SERIES_EFR32FG1P <CONFIG_SOC_SERIES_EFR32FG1P>`
- \ :kconfig:`SOC_SERIES_EFR32MG12P <CONFIG_SOC_SERIES_EFR32MG12P>`

Kconfig definitions
===================



At ``<Zephyr SoC>/arm/silabs_exx32/Kconfig:192``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:15`` → ``<BuildDir>/kconfig/Kconfig.soc.arch:2``

Menu path: (Top) → Hardware Configuration

.. code-block:: kconfig

    config SOC_GECKO_HAS_INDIVIDUAL_PIN_LOCATION
    	bool
    	depends on SOC_FAMILY_EXX32
    	help
    	  If enabled, indicates that SoC allows to configure individual pin
    	  locations. This is supported by e.g. efr32fg1p, efr32mg12p series.
    	  If disabled, indicates that pin locations are configured in groups.
    	  This is supported by e.g. efm32hg, efm32wg series.

----

At ``<Zephyr SoC>/arm/silabs_exx32/Kconfig:192``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:18``

Menu path: (Top) → Hardware Configuration

.. code-block:: kconfig

    config SOC_GECKO_HAS_INDIVIDUAL_PIN_LOCATION
    	bool
    	depends on SOC_FAMILY_EXX32
    	help
    	  If enabled, indicates that SoC allows to configure individual pin
    	  locations. This is supported by e.g. efr32fg1p, efr32mg12p series.
    	  If disabled, indicates that pin locations are configured in groups.
    	  This is supported by e.g. efm32hg, efm32wg series.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*