:orphan:

.. title:: CONFIG_SOC_LPC55S16

.. kconfig:: CONFIG_SOC_LPC55S16

CONFIG_SOC_LPC55S16
###################

*SOC\_LPC55S16 M33*

*SOC\_LPC55S16 M33*

Type: ``bool``

Direct dependencies
===================

\ :ref:`<choice: LPC5500 Series MCU Selection> <choice_117>` || \ :ref:`<choice: LPC5500 Series MCU Selection> <choice_220>`

*(Includes any dependencies from ifs and menus.)*

Symbols selected by this symbol
===============================

- \ :kconfig:`CPU_CORTEX_M33 <CONFIG_CPU_CORTEX_M33>`
- \ :kconfig:`CPU_HAS_ARM_SAU <CONFIG_CPU_HAS_ARM_SAU>`
- \ :kconfig:`CPU_HAS_ARM_MPU <CONFIG_CPU_HAS_ARM_MPU>`
- \ :kconfig:`CPU_HAS_FPU <CONFIG_CPU_HAS_FPU>`
- \ :kconfig:`ARMV8_M_DSP <CONFIG_ARMV8_M_DSP>`
- \ :kconfig:`ARM_TRUSTZONE_M <CONFIG_ARM_TRUSTZONE_M>`
- \ :kconfig:`CLOCK_CONTROL <CONFIG_CLOCK_CONTROL>`
- \ :kconfig:`HAS_MCUX_IAP <CONFIG_HAS_MCUX_IAP>` if !\ :kconfig:`TRUSTED_EXECUTION_NONSECURE <CONFIG_TRUSTED_EXECUTION_NONSECURE>`
- \ :kconfig:`CPU_CORTEX_M33 <CONFIG_CPU_CORTEX_M33>`
- \ :kconfig:`CPU_HAS_ARM_SAU <CONFIG_CPU_HAS_ARM_SAU>`
- \ :kconfig:`CPU_HAS_ARM_MPU <CONFIG_CPU_HAS_ARM_MPU>`
- \ :kconfig:`CPU_HAS_FPU <CONFIG_CPU_HAS_FPU>`
- \ :kconfig:`ARMV8_M_DSP <CONFIG_ARMV8_M_DSP>`
- \ :kconfig:`ARM_TRUSTZONE_M <CONFIG_ARM_TRUSTZONE_M>`
- \ :kconfig:`CLOCK_CONTROL <CONFIG_CLOCK_CONTROL>`
- \ :kconfig:`HAS_MCUX_IAP <CONFIG_HAS_MCUX_IAP>` if !\ :kconfig:`TRUSTED_EXECUTION_NONSECURE <CONFIG_TRUSTED_EXECUTION_NONSECURE>`

Kconfig definitions
===================



At ``<Zephyr SoC>/arm/nxp_lpc/lpc55xxx/Kconfig.soc:10``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:15`` → ``<BuildDir>/kconfig/Kconfig.soc.arch:2`` → ``<Zephyr SoC>/arm/nxp_lpc/Kconfig:14``

Menu path: (Top) → Hardware Configuration → LPC5500 Series MCU Selection

.. code-block:: kconfig

    config SOC_LPC55S16
    	bool "SOC_LPC55S16 M33"
    	select CPU_CORTEX_M33
    	select CPU_HAS_ARM_SAU
    	select CPU_HAS_ARM_MPU
    	select CPU_HAS_FPU
    	select ARMV8_M_DSP
    	select ARM_TRUSTZONE_M
    	select CLOCK_CONTROL
    	select HAS_MCUX_IAP if !TRUSTED_EXECUTION_NONSECURE
    	depends on <choice>

----

At ``<Zephyr SoC>/arm/nxp_lpc/lpc55xxx/Kconfig.soc:10``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:18`` → ``<Zephyr SoC>/arm/nxp_lpc/Kconfig:14``

Menu path: (Top) → Hardware Configuration → LPC5500 Series MCU Selection

.. code-block:: kconfig

    config SOC_LPC55S16
    	bool "SOC_LPC55S16 M33"
    	select CPU_CORTEX_M33
    	select CPU_HAS_ARM_SAU
    	select CPU_HAS_ARM_MPU
    	select CPU_HAS_FPU
    	select ARMV8_M_DSP
    	select ARM_TRUSTZONE_M
    	select CLOCK_CONTROL
    	select HAS_MCUX_IAP if !TRUSTED_EXECUTION_NONSECURE
    	depends on <choice>

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*