:orphan:

.. title:: CONFIG_SOC_MEC1501_DEBUG_DISABLED

.. kconfig:: CONFIG_SOC_MEC1501_DEBUG_DISABLED

CONFIG_SOC_MEC1501_DEBUG_DISABLED
#################################

*Disable debug support*

*Disable debug support*

Type: ``bool``

Help
====

.. code-block:: none

    Debug port is disabled, JTAG/SWD cannot be enabled. JTAG_RST#
    pin is ignored. All other JTAG pins can be used as GPIOs
    or other non-JTAG alternate functions.

Help
====

.. code-block:: none

    Debug port is disabled, JTAG/SWD cannot be enabled. JTAG_RST#
    pin is ignored. All other JTAG pins can be used as GPIOs
    or other non-JTAG alternate functions.

Direct dependencies
===================

\ :ref:`<choice: MEC1501 debug interface general configuration> <choice_82>` || \ :ref:`<choice: MEC1501 debug interface general configuration> <choice_194>`

*(Includes any dependencies from ifs and menus.)*

Kconfig definitions
===================



At ``<Zephyr SoC>/arm/microchip_mec/mec1501/Kconfig.soc:87``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:15`` → ``<BuildDir>/kconfig/Kconfig.soc.arch:2`` → ``<Zephyr SoC>/arm/microchip_mec/Kconfig:15``

Menu path: (Top) → Hardware Configuration → MEC1501 debug interface general configuration

.. code-block:: kconfig

    config SOC_MEC1501_DEBUG_DISABLED
    	bool "Disable debug support"
    	depends on <choice>
    	help
    	  Debug port is disabled, JTAG/SWD cannot be enabled. JTAG_RST#
    	  pin is ignored. All other JTAG pins can be used as GPIOs
    	  or other non-JTAG alternate functions.

----

At ``<Zephyr SoC>/arm/microchip_mec/mec1501/Kconfig.soc:87``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:18`` → ``<Zephyr SoC>/arm/microchip_mec/Kconfig:15``

Menu path: (Top) → Hardware Configuration → MEC1501 debug interface general configuration

.. code-block:: kconfig

    config SOC_MEC1501_DEBUG_DISABLED
    	bool "Disable debug support"
    	depends on <choice>
    	help
    	  Debug port is disabled, JTAG/SWD cannot be enabled. JTAG_RST#
    	  pin is ignored. All other JTAG pins can be used as GPIOs
    	  or other non-JTAG alternate functions.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*