:orphan:

.. title:: CONFIG_SOC_NRF51822_QFAB

.. kconfig:: CONFIG_SOC_NRF51822_QFAB

CONFIG_SOC_NRF51822_QFAB
########################

*NRF51822\_QFAB*

*NRF51822\_QFAB*

Type: ``bool``

Direct dependencies
===================

\ :ref:`<choice: nRF51x MCU Selection> <choice_86>` || \ :ref:`<choice: nRF51x MCU Selection> <choice_198>`

*(Includes any dependencies from ifs and menus.)*

Symbols selected by this symbol
===============================

- \ :kconfig:`HAS_HW_NRF_ADC <CONFIG_HAS_HW_NRF_ADC>`
- \ :kconfig:`HAS_HW_NRF_CCM <CONFIG_HAS_HW_NRF_CCM>`
- \ :kconfig:`HAS_HW_NRF_CLOCK <CONFIG_HAS_HW_NRF_CLOCK>`
- \ :kconfig:`HAS_HW_NRF_ECB <CONFIG_HAS_HW_NRF_ECB>`
- \ :kconfig:`HAS_HW_NRF_GPIO0 <CONFIG_HAS_HW_NRF_GPIO0>`
- \ :kconfig:`HAS_HW_NRF_GPIOTE <CONFIG_HAS_HW_NRF_GPIOTE>`
- \ :kconfig:`HAS_HW_NRF_LPCOMP <CONFIG_HAS_HW_NRF_LPCOMP>`
- \ :kconfig:`HAS_HW_NRF_MPU <CONFIG_HAS_HW_NRF_MPU>`
- \ :kconfig:`HAS_HW_NRF_QDEC <CONFIG_HAS_HW_NRF_QDEC>`
- \ :kconfig:`HAS_HW_NRF_POWER <CONFIG_HAS_HW_NRF_POWER>`
- \ :kconfig:`HAS_HW_NRF_PPI <CONFIG_HAS_HW_NRF_PPI>`
- \ :kconfig:`HAS_HW_NRF_RNG <CONFIG_HAS_HW_NRF_RNG>`
- \ :kconfig:`HAS_HW_NRF_RTC0 <CONFIG_HAS_HW_NRF_RTC0>`
- \ :kconfig:`HAS_HW_NRF_RTC1 <CONFIG_HAS_HW_NRF_RTC1>`
- \ :kconfig:`HAS_HW_NRF_SPI0 <CONFIG_HAS_HW_NRF_SPI0>`
- \ :kconfig:`HAS_HW_NRF_SPI1 <CONFIG_HAS_HW_NRF_SPI1>`
- \ :kconfig:`HAS_HW_NRF_SPIS1 <CONFIG_HAS_HW_NRF_SPIS1>`
- \ :kconfig:`HAS_HW_NRF_TEMP <CONFIG_HAS_HW_NRF_TEMP>`
- \ :kconfig:`HAS_HW_NRF_TIMER0 <CONFIG_HAS_HW_NRF_TIMER0>`
- \ :kconfig:`HAS_HW_NRF_TIMER1 <CONFIG_HAS_HW_NRF_TIMER1>`
- \ :kconfig:`HAS_HW_NRF_TIMER2 <CONFIG_HAS_HW_NRF_TIMER2>`
- \ :kconfig:`HAS_HW_NRF_TWI0 <CONFIG_HAS_HW_NRF_TWI0>`
- \ :kconfig:`HAS_HW_NRF_TWI1 <CONFIG_HAS_HW_NRF_TWI1>`
- \ :kconfig:`HAS_HW_NRF_UART0 <CONFIG_HAS_HW_NRF_UART0>`
- \ :kconfig:`HAS_HW_NRF_WDT <CONFIG_HAS_HW_NRF_WDT>`
- \ :kconfig:`HAS_HW_NRF_ADC <CONFIG_HAS_HW_NRF_ADC>`
- \ :kconfig:`HAS_HW_NRF_CCM <CONFIG_HAS_HW_NRF_CCM>`
- \ :kconfig:`HAS_HW_NRF_CLOCK <CONFIG_HAS_HW_NRF_CLOCK>`
- \ :kconfig:`HAS_HW_NRF_ECB <CONFIG_HAS_HW_NRF_ECB>`
- \ :kconfig:`HAS_HW_NRF_GPIO0 <CONFIG_HAS_HW_NRF_GPIO0>`
- \ :kconfig:`HAS_HW_NRF_GPIOTE <CONFIG_HAS_HW_NRF_GPIOTE>`
- \ :kconfig:`HAS_HW_NRF_LPCOMP <CONFIG_HAS_HW_NRF_LPCOMP>`
- \ :kconfig:`HAS_HW_NRF_MPU <CONFIG_HAS_HW_NRF_MPU>`
- \ :kconfig:`HAS_HW_NRF_QDEC <CONFIG_HAS_HW_NRF_QDEC>`
- \ :kconfig:`HAS_HW_NRF_POWER <CONFIG_HAS_HW_NRF_POWER>`
- \ :kconfig:`HAS_HW_NRF_PPI <CONFIG_HAS_HW_NRF_PPI>`
- \ :kconfig:`HAS_HW_NRF_RNG <CONFIG_HAS_HW_NRF_RNG>`
- \ :kconfig:`HAS_HW_NRF_RTC0 <CONFIG_HAS_HW_NRF_RTC0>`
- \ :kconfig:`HAS_HW_NRF_RTC1 <CONFIG_HAS_HW_NRF_RTC1>`
- \ :kconfig:`HAS_HW_NRF_SPI0 <CONFIG_HAS_HW_NRF_SPI0>`
- \ :kconfig:`HAS_HW_NRF_SPI1 <CONFIG_HAS_HW_NRF_SPI1>`
- \ :kconfig:`HAS_HW_NRF_SPIS1 <CONFIG_HAS_HW_NRF_SPIS1>`
- \ :kconfig:`HAS_HW_NRF_TEMP <CONFIG_HAS_HW_NRF_TEMP>`
- \ :kconfig:`HAS_HW_NRF_TIMER0 <CONFIG_HAS_HW_NRF_TIMER0>`
- \ :kconfig:`HAS_HW_NRF_TIMER1 <CONFIG_HAS_HW_NRF_TIMER1>`
- \ :kconfig:`HAS_HW_NRF_TIMER2 <CONFIG_HAS_HW_NRF_TIMER2>`
- \ :kconfig:`HAS_HW_NRF_TWI0 <CONFIG_HAS_HW_NRF_TWI0>`
- \ :kconfig:`HAS_HW_NRF_TWI1 <CONFIG_HAS_HW_NRF_TWI1>`
- \ :kconfig:`HAS_HW_NRF_UART0 <CONFIG_HAS_HW_NRF_UART0>`
- \ :kconfig:`HAS_HW_NRF_WDT <CONFIG_HAS_HW_NRF_WDT>`

Kconfig definitions
===================



At ``<Zephyr SoC>/arm/nordic_nrf/nrf51/Kconfig.soc:38``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:15`` → ``<BuildDir>/kconfig/Kconfig.soc.arch:2`` → ``<Zephyr SoC>/arm/nordic_nrf/Kconfig:17``

Menu path: (Top) → Hardware Configuration → nRF51x MCU Selection

.. code-block:: kconfig

    config SOC_NRF51822_QFAB
    	bool "NRF51822_QFAB"
    	select HAS_HW_NRF_ADC
    	select HAS_HW_NRF_CCM
    	select HAS_HW_NRF_CLOCK
    	select HAS_HW_NRF_ECB
    	select HAS_HW_NRF_GPIO0
    	select HAS_HW_NRF_GPIOTE
    	select HAS_HW_NRF_LPCOMP
    	select HAS_HW_NRF_MPU
    	select HAS_HW_NRF_QDEC
    	select HAS_HW_NRF_POWER
    	select HAS_HW_NRF_PPI
    	select HAS_HW_NRF_RNG
    	select HAS_HW_NRF_RTC0
    	select HAS_HW_NRF_RTC1
    	select HAS_HW_NRF_SPI0
    	select HAS_HW_NRF_SPI1
    	select HAS_HW_NRF_SPIS1
    	select HAS_HW_NRF_TEMP
    	select HAS_HW_NRF_TIMER0
    	select HAS_HW_NRF_TIMER1
    	select HAS_HW_NRF_TIMER2
    	select HAS_HW_NRF_TWI0
    	select HAS_HW_NRF_TWI1
    	select HAS_HW_NRF_UART0
    	select HAS_HW_NRF_WDT
    	depends on <choice>

----

At ``<Zephyr SoC>/arm/nordic_nrf/nrf51/Kconfig.soc:38``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:18`` → ``<Zephyr SoC>/arm/nordic_nrf/Kconfig:17``

Menu path: (Top) → Hardware Configuration → nRF51x MCU Selection

.. code-block:: kconfig

    config SOC_NRF51822_QFAB
    	bool "NRF51822_QFAB"
    	select HAS_HW_NRF_ADC
    	select HAS_HW_NRF_CCM
    	select HAS_HW_NRF_CLOCK
    	select HAS_HW_NRF_ECB
    	select HAS_HW_NRF_GPIO0
    	select HAS_HW_NRF_GPIOTE
    	select HAS_HW_NRF_LPCOMP
    	select HAS_HW_NRF_MPU
    	select HAS_HW_NRF_QDEC
    	select HAS_HW_NRF_POWER
    	select HAS_HW_NRF_PPI
    	select HAS_HW_NRF_RNG
    	select HAS_HW_NRF_RTC0
    	select HAS_HW_NRF_RTC1
    	select HAS_HW_NRF_SPI0
    	select HAS_HW_NRF_SPI1
    	select HAS_HW_NRF_SPIS1
    	select HAS_HW_NRF_TEMP
    	select HAS_HW_NRF_TIMER0
    	select HAS_HW_NRF_TIMER1
    	select HAS_HW_NRF_TIMER2
    	select HAS_HW_NRF_TWI0
    	select HAS_HW_NRF_TWI1
    	select HAS_HW_NRF_UART0
    	select HAS_HW_NRF_WDT
    	depends on <choice>

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*