:orphan:

.. title:: CONFIG_SOC_POWER_MANAGEMENT

.. kconfig:: CONFIG_SOC_POWER_MANAGEMENT

CONFIG_SOC_POWER_MANAGEMENT
###########################

*MEC1501 Power Management*

*System Power Management in NPCX family*

*MEC1501 Power Management*

*System Power Management in NPCX family*

Type: ``bool``

Help
====

.. code-block:: none

    This option enables the board to implement SoC-specific power
    management policies whenever the kernel becomes idle. The power
    management subsystem will restore to the active state until an
    wake-up event is received no matter the system timer is expired or
    the other signals occurred such as GPIO, host access, and so on.

Help
====

.. code-block:: none

    This option enables the board to implement SoC-specific power
    management policies whenever the kernel becomes idle. The power
    management subsystem will restore to the active state until an
    wake-up event is received no matter the system timer is expired or
    the other signals occurred such as GPIO, host access, and so on.

Direct dependencies
===================

\ :kconfig:`SOC_FAMILY_MEC <CONFIG_SOC_FAMILY_MEC>` || (\ :kconfig:`SOC_FAMILY_NPCX <CONFIG_SOC_FAMILY_NPCX>` && \ :kconfig:`SOC_FAMILY_NPCX <CONFIG_SOC_FAMILY_NPCX>`) || \ :kconfig:`SOC_FAMILY_MEC <CONFIG_SOC_FAMILY_MEC>` || (\ :kconfig:`SOC_FAMILY_NPCX <CONFIG_SOC_FAMILY_NPCX>` && \ :kconfig:`SOC_FAMILY_NPCX <CONFIG_SOC_FAMILY_NPCX>`)

*(Includes any dependencies from ifs and menus.)*

Defaults
========

No defaults. Implicitly defaults to ``n``.

Kconfig definitions
===================



At ``<Zephyr SoC>/arm/microchip_mec/mec1501/Kconfig.soc:19``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:15`` → ``<BuildDir>/kconfig/Kconfig.soc.arch:2`` → ``<Zephyr SoC>/arm/microchip_mec/Kconfig:15``

Menu path: (Top) → Hardware Configuration

.. code-block:: kconfig

    config SOC_POWER_MANAGEMENT
    	bool "MEC1501 Power Management"
    	depends on SOC_FAMILY_MEC

----

At ``<Zephyr SoC>/arm/nuvoton_npcx/Kconfig:185``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:15`` → ``<BuildDir>/kconfig/Kconfig.soc.arch:2``

Menu path: (Top) → Hardware Configuration

.. code-block:: kconfig

    config SOC_POWER_MANAGEMENT
    	bool "System Power Management in NPCX family"
    	depends on SOC_FAMILY_NPCX && SOC_FAMILY_NPCX
    	help
    	  This option enables the board to implement SoC-specific power
    	  management policies whenever the kernel becomes idle. The power
    	  management subsystem will restore to the active state until an
    	  wake-up event is received no matter the system timer is expired or
    	  the other signals occurred such as GPIO, host access, and so on.

----

At ``<Zephyr SoC>/arm/microchip_mec/mec1501/Kconfig.soc:19``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:18`` → ``<Zephyr SoC>/arm/microchip_mec/Kconfig:15``

Menu path: (Top) → Hardware Configuration

.. code-block:: kconfig

    config SOC_POWER_MANAGEMENT
    	bool "MEC1501 Power Management"
    	depends on SOC_FAMILY_MEC

----

At ``<Zephyr SoC>/arm/nuvoton_npcx/Kconfig:185``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:18``

Menu path: (Top) → Hardware Configuration

.. code-block:: kconfig

    config SOC_POWER_MANAGEMENT
    	bool "System Power Management in NPCX family"
    	depends on SOC_FAMILY_NPCX && SOC_FAMILY_NPCX
    	help
    	  This option enables the board to implement SoC-specific power
    	  management policies whenever the kernel becomes idle. The power
    	  management subsystem will restore to the active state until an
    	  wake-up event is received no matter the system timer is expired or
    	  the other signals occurred such as GPIO, host access, and so on.

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*