:orphan:

.. title:: CONFIG_SOC_SERIES_CC13X2_CC26X2

.. kconfig:: CONFIG_SOC_SERIES_CC13X2_CC26X2

CONFIG_SOC_SERIES_CC13X2_CC26X2
###############################

*TI SimpleLink Family CC13x2 / CC26x2*

*TI SimpleLink Family CC13x2 / CC26x2*

Type: ``bool``

Help
====

.. code-block:: none

    Enable support for TI SimpleLink CC13x2 / CC26x2 SoCs

Help
====

.. code-block:: none

    Enable support for TI SimpleLink CC13x2 / CC26x2 SoCs

Direct dependencies
===================

\ :ref:`<choice: SoC/CPU/Configuration Selection> <choice_41>` || \ :ref:`<choice: SoC/CPU/Configuration Selection> <choice_41>`

*(Includes any dependencies from ifs and menus.)*

Symbols selected by this symbol
===============================

- \ :kconfig:`ARM <CONFIG_ARM>`
- \ :kconfig:`CPU_CORTEX_M4 <CONFIG_CPU_CORTEX_M4>`
- \ :kconfig:`DYNAMIC_INTERRUPTS <CONFIG_DYNAMIC_INTERRUPTS>`
- \ :kconfig:`CPU_CORTEX_M_HAS_DWT <CONFIG_CPU_CORTEX_M_HAS_DWT>`
- \ :kconfig:`CPU_HAS_FPU <CONFIG_CPU_HAS_FPU>`
- \ :kconfig:`SOC_FAMILY_TISIMPLELINK <CONFIG_SOC_FAMILY_TISIMPLELINK>`
- \ :kconfig:`HAS_CC13X2_CC26X2_SDK <CONFIG_HAS_CC13X2_CC26X2_SDK>`
- \ :kconfig:`HAS_TI_CCFG <CONFIG_HAS_TI_CCFG>`
- \ :kconfig:`ARM <CONFIG_ARM>`
- \ :kconfig:`CPU_CORTEX_M4 <CONFIG_CPU_CORTEX_M4>`
- \ :kconfig:`DYNAMIC_INTERRUPTS <CONFIG_DYNAMIC_INTERRUPTS>`
- \ :kconfig:`CPU_CORTEX_M_HAS_DWT <CONFIG_CPU_CORTEX_M_HAS_DWT>`
- \ :kconfig:`CPU_HAS_FPU <CONFIG_CPU_HAS_FPU>`
- \ :kconfig:`SOC_FAMILY_TISIMPLELINK <CONFIG_SOC_FAMILY_TISIMPLELINK>`
- \ :kconfig:`HAS_CC13X2_CC26X2_SDK <CONFIG_HAS_CC13X2_CC26X2_SDK>`
- \ :kconfig:`HAS_TI_CCFG <CONFIG_HAS_TI_CCFG>`

Kconfig definitions
===================



At ``<Zephyr SoC>/arm/ti_simplelink/cc13x2_cc26x2/Kconfig.series:6``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:7`` → ``<BuildDir>/kconfig/Kconfig.soc:1`` → ``<Zephyr SoC>/arm/ti_simplelink/Kconfig.soc:5``

Menu path: (Top) → SoC/CPU/Configuration Selection

.. code-block:: kconfig

    config SOC_SERIES_CC13X2_CC26X2
    	bool "TI SimpleLink Family CC13x2 / CC26x2"
    	select ARM
    	select CPU_CORTEX_M4
    	select DYNAMIC_INTERRUPTS
    	select CPU_CORTEX_M_HAS_DWT
    	select CPU_HAS_FPU
    	select SOC_FAMILY_TISIMPLELINK
    	select HAS_CC13X2_CC26X2_SDK
    	select HAS_TI_CCFG
    	depends on <choice>
    	help
    	  Enable support for TI SimpleLink CC13x2 / CC26x2 SoCs

----

At ``<Zephyr SoC>/arm/ti_simplelink/cc13x2_cc26x2/Kconfig.series:6``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:9`` → ``<Zephyr SoC>/arm/ti_simplelink/Kconfig.soc:5``

Menu path: (Top) → SoC/CPU/Configuration Selection

.. code-block:: kconfig

    config SOC_SERIES_CC13X2_CC26X2
    	bool "TI SimpleLink Family CC13x2 / CC26x2"
    	select ARM
    	select CPU_CORTEX_M4
    	select DYNAMIC_INTERRUPTS
    	select CPU_CORTEX_M_HAS_DWT
    	select CPU_HAS_FPU
    	select SOC_FAMILY_TISIMPLELINK
    	select HAS_CC13X2_CC26X2_SDK
    	select HAS_TI_CCFG
    	depends on <choice>
    	help
    	  Enable support for TI SimpleLink CC13x2 / CC26x2 SoCs

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*