:orphan:

.. title:: CONFIG_SOC_SERIES_NXP_IMX8

.. kconfig:: CONFIG_SOC_SERIES_NXP_IMX8

CONFIG_SOC_SERIES_NXP_IMX8
##########################

*NXP i.MX8*

*NXP i.MX8*

Type: ``bool``

Help
====

.. code-block:: none

    NXP i.MX8

Help
====

.. code-block:: none

    NXP i.MX8

Direct dependencies
===================

\ :ref:`<choice: SoC/CPU/Configuration Selection> <choice_41>` || \ :ref:`<choice: SoC/CPU/Configuration Selection> <choice_41>`

*(Includes any dependencies from ifs and menus.)*

Symbols selected by this symbol
===============================

- \ :kconfig:`SOC_FAMILY_NXP_ADSP <CONFIG_SOC_FAMILY_NXP_ADSP>`
- \ :kconfig:`XTENSA <CONFIG_XTENSA>`
- \ :kconfig:`XTENSA_HAL <CONFIG_XTENSA_HAL>` if "" != "xcc"
- \ :kconfig:`XTENSA_RESET_VECTOR <CONFIG_XTENSA_RESET_VECTOR>`
- \ :kconfig:`XTENSA_USE_CORE_CRT1 <CONFIG_XTENSA_USE_CORE_CRT1>`
- \ :kconfig:`ATOMIC_OPERATIONS_BUILTIN <CONFIG_ATOMIC_OPERATIONS_BUILTIN>`
- \ :kconfig:`SOC_FAMILY_NXP_ADSP <CONFIG_SOC_FAMILY_NXP_ADSP>`
- \ :kconfig:`XTENSA <CONFIG_XTENSA>`
- \ :kconfig:`XTENSA_HAL <CONFIG_XTENSA_HAL>` if "" != "xcc"
- \ :kconfig:`XTENSA_RESET_VECTOR <CONFIG_XTENSA_RESET_VECTOR>`
- \ :kconfig:`XTENSA_USE_CORE_CRT1 <CONFIG_XTENSA_USE_CORE_CRT1>`
- \ :kconfig:`ATOMIC_OPERATIONS_BUILTIN <CONFIG_ATOMIC_OPERATIONS_BUILTIN>`

Kconfig definitions
===================



At ``<Zephyr SoC>/xtensa/nxp_adsp/imx8/Kconfig.series:4``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:7`` → ``<BuildDir>/kconfig/Kconfig.soc:1`` → ``<Zephyr SoC>/xtensa/nxp_adsp/Kconfig.soc:6``

Menu path: (Top) → SoC/CPU/Configuration Selection

.. code-block:: kconfig

    config SOC_SERIES_NXP_IMX8
    	bool "NXP i.MX8"
    	select SOC_FAMILY_NXP_ADSP
    	select XTENSA
    	select XTENSA_HAL if "" != "xcc"
    	select XTENSA_RESET_VECTOR
    	select XTENSA_USE_CORE_CRT1
    	select ATOMIC_OPERATIONS_BUILTIN
    	depends on <choice>
    	help
    	  NXP i.MX8

----

At ``<Zephyr SoC>/xtensa/nxp_adsp/imx8/Kconfig.series:4``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:9`` → ``<Zephyr SoC>/xtensa/nxp_adsp/Kconfig.soc:6``

Menu path: (Top) → SoC/CPU/Configuration Selection

.. code-block:: kconfig

    config SOC_SERIES_NXP_IMX8
    	bool "NXP i.MX8"
    	select SOC_FAMILY_NXP_ADSP
    	select XTENSA
    	select XTENSA_HAL if "" != "xcc"
    	select XTENSA_RESET_VECTOR
    	select XTENSA_USE_CORE_CRT1
    	select ATOMIC_OPERATIONS_BUILTIN
    	depends on <choice>
    	help
    	  NXP i.MX8

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*