:orphan:

.. title:: CONFIG_SOC_SERIES_STM32U5X

.. kconfig:: CONFIG_SOC_SERIES_STM32U5X

CONFIG_SOC_SERIES_STM32U5X
##########################

*STM32U5x Series MCU*

*STM32U5x Series MCU*

Type: ``bool``

Help
====

.. code-block:: none

    Enable support for STM32U5 MCU series

Help
====

.. code-block:: none

    Enable support for STM32U5 MCU series

Direct dependencies
===================

\ :ref:`<choice: SoC/CPU/Configuration Selection> <choice_41>` || \ :ref:`<choice: SoC/CPU/Configuration Selection> <choice_41>`

*(Includes any dependencies from ifs and menus.)*

Symbols selected by this symbol
===============================

- \ :kconfig:`ARM <CONFIG_ARM>`
- \ :kconfig:`CPU_CORTEX_M33 <CONFIG_CPU_CORTEX_M33>`
- \ :kconfig:`SOC_FAMILY_STM32 <CONFIG_SOC_FAMILY_STM32>`
- \ :kconfig:`ARM_TRUSTZONE_M <CONFIG_ARM_TRUSTZONE_M>`
- \ :kconfig:`CPU_HAS_ARM_SAU <CONFIG_CPU_HAS_ARM_SAU>`
- \ :kconfig:`CPU_HAS_ARM_MPU <CONFIG_CPU_HAS_ARM_MPU>`
- \ :kconfig:`CPU_HAS_FPU <CONFIG_CPU_HAS_FPU>`
- \ :kconfig:`ARMV8_M_DSP <CONFIG_ARMV8_M_DSP>`
- \ :kconfig:`CPU_CORTEX_M_HAS_DWT <CONFIG_CPU_CORTEX_M_HAS_DWT>`
- \ :kconfig:`HAS_STM32CUBE <CONFIG_HAS_STM32CUBE>`
- \ :kconfig:`ARM <CONFIG_ARM>`
- \ :kconfig:`CPU_CORTEX_M33 <CONFIG_CPU_CORTEX_M33>`
- \ :kconfig:`SOC_FAMILY_STM32 <CONFIG_SOC_FAMILY_STM32>`
- \ :kconfig:`ARM_TRUSTZONE_M <CONFIG_ARM_TRUSTZONE_M>`
- \ :kconfig:`CPU_HAS_ARM_SAU <CONFIG_CPU_HAS_ARM_SAU>`
- \ :kconfig:`CPU_HAS_ARM_MPU <CONFIG_CPU_HAS_ARM_MPU>`
- \ :kconfig:`CPU_HAS_FPU <CONFIG_CPU_HAS_FPU>`
- \ :kconfig:`ARMV8_M_DSP <CONFIG_ARMV8_M_DSP>`
- \ :kconfig:`CPU_CORTEX_M_HAS_DWT <CONFIG_CPU_CORTEX_M_HAS_DWT>`
- \ :kconfig:`HAS_STM32CUBE <CONFIG_HAS_STM32CUBE>`

Kconfig definitions
===================



At ``<Zephyr SoC>/arm/st_stm32/stm32u5/Kconfig.series:6``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:7`` → ``<BuildDir>/kconfig/Kconfig.soc:1`` → ``<Zephyr SoC>/arm/st_stm32/Kconfig.soc:6``

Menu path: (Top) → SoC/CPU/Configuration Selection

.. code-block:: kconfig

    config SOC_SERIES_STM32U5X
    	bool "STM32U5x Series MCU"
    	select ARM
    	select CPU_CORTEX_M33
    	select SOC_FAMILY_STM32
    	select ARM_TRUSTZONE_M
    	select CPU_HAS_ARM_SAU
    	select CPU_HAS_ARM_MPU
    	select CPU_HAS_FPU
    	select ARMV8_M_DSP
    	select CPU_CORTEX_M_HAS_DWT
    	select HAS_STM32CUBE
    	depends on <choice>
    	help
    	  Enable support for STM32U5 MCU series

----

At ``<Zephyr SoC>/arm/st_stm32/stm32u5/Kconfig.series:6``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``<Zephyr SoC>/Kconfig:9`` → ``<Zephyr SoC>/arm/st_stm32/Kconfig.soc:6``

Menu path: (Top) → SoC/CPU/Configuration Selection

.. code-block:: kconfig

    config SOC_SERIES_STM32U5X
    	bool "STM32U5x Series MCU"
    	select ARM
    	select CPU_CORTEX_M33
    	select SOC_FAMILY_STM32
    	select ARM_TRUSTZONE_M
    	select CPU_HAS_ARM_SAU
    	select CPU_HAS_ARM_MPU
    	select CPU_HAS_FPU
    	select ARMV8_M_DSP
    	select CPU_CORTEX_M_HAS_DWT
    	select HAS_STM32CUBE
    	depends on <choice>
    	help
    	  Enable support for STM32U5 MCU series

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*