:orphan:

.. title:: choice: STM32 PLL Clock Source

.. _choice_317:

.. describe:: choice: STM32 PLL Clock Source

*STM32 PLL Clock Source*

Type: ``bool``

Direct dependencies
===================

\ :kconfig:`CLOCK_STM32_SYSCLK_SRC_PLL <CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL>` && !\ :kconfig:`CLOCK_CONTROL_STM32_HAS_DTS <CONFIG_CLOCK_CONTROL_STM32_HAS_DTS>` && !\ :kconfig:`SOC_SERIES_STM32MP1X <CONFIG_SOC_SERIES_STM32MP1X>` && \ :kconfig:`CLOCK_CONTROL_STM32_CUBE <CONFIG_CLOCK_CONTROL_STM32_CUBE>` && \ :kconfig:`CLOCK_CONTROL <CONFIG_CLOCK_CONTROL>`

*(Includes any dependencies from ifs and menus.)*

Default
=======

- \ :kconfig:`CLOCK_STM32_PLL_SRC_HSI <CONFIG_CLOCK_STM32_PLL_SRC_HSI>`

Choice options
==============

- \ :kconfig:`CLOCK_STM32_PLL_SRC_MSI <CONFIG_CLOCK_STM32_PLL_SRC_MSI>`
- \ :kconfig:`CLOCK_STM32_PLL_SRC_HSI <CONFIG_CLOCK_STM32_PLL_SRC_HSI>`
- \ :kconfig:`CLOCK_STM32_PLL_SRC_HSE <CONFIG_CLOCK_STM32_PLL_SRC_HSE>`
- \ :kconfig:`CLOCK_STM32_PLL_SRC_PLL2 <CONFIG_CLOCK_STM32_PLL_SRC_PLL2>`
- \ :kconfig:`CLOCK_STM32_PLL_SRC_CSI <CONFIG_CLOCK_STM32_PLL_SRC_CSI>`

Kconfig definition
==================



At ``<Zephyr Driver>/clock_control/Kconfig.stm32:111``

Included via ``Kconfig:8`` → ``Kconfig.zephyr:42`` → ``<Zephyr Driver>/Kconfig:56`` → ``<Zephyr Driver>/clock_control/Kconfig:25``

Menu path: (Top) → Device Drivers → Hardware clock controller support → STM32 Reset & Clock Control

.. code-block:: kconfig

    choice
    	bool "STM32 PLL Clock Source"
    	default CLOCK_STM32_PLL_SRC_HSI
    	depends on CLOCK_STM32_SYSCLK_SRC_PLL && !CLOCK_CONTROL_STM32_HAS_DTS && !SOC_SERIES_STM32MP1X && CLOCK_CONTROL_STM32_CUBE && CLOCK_CONTROL

*(The 'depends on' condition includes propagated dependencies from ifs and menus.)*