:orphan: .. title:: CONFIG_SOC_ATMEL_SAM4S_PLLA_MULA .. kconfig:: CONFIG_SOC_ATMEL_SAM4S_PLLA_MULA CONFIG_SOC_ATMEL_SAM4S_PLLA_MULA ################################ *PLL MULA* Type: ``hex`` Help ==== .. code-block:: none This is the multiplier (MULA) used by the PLL. The processor clock is (MAINCK * (MULA + 1) / DIVA). Board config file can override this settings for a particular board. With default of MULA == 9, and DIVA == 1, PLL is running at 10 times of main clock. Direct dependencies =================== \ :kconfig:`SOC_SERIES_SAM4S ` && \ :kconfig:`SOC_FAMILY_SAM ` *(Includes any dependencies from ifs and menus.)* Default ======= - 0x09 Kconfig definition ================== At ``/arm/atmel_sam/sam4s/Kconfig.soc:76`` Included via ``Kconfig:8`` → ``Kconfig.zephyr:38`` → ``/Kconfig:18`` → ``/arm/atmel_sam/Kconfig:17`` Menu path: (Top) → Hardware Configuration .. code-block:: kconfig config SOC_ATMEL_SAM4S_PLLA_MULA hex "PLL MULA" default 0x09 depends on SOC_SERIES_SAM4S && SOC_FAMILY_SAM help This is the multiplier (MULA) used by the PLL. The processor clock is (MAINCK * (MULA + 1) / DIVA). Board config file can override this settings for a particular board. With default of MULA == 9, and DIVA == 1, PLL is running at 10 times of main clock. *(The 'depends on' condition includes propagated dependencies from ifs and menus.)*