atmel,sam0-pinctrl

Vendor: Atmel Corporation

Description

Atmel SAM0 Pinctrl container node

The Atmel SAM0 pins implements following pin configuration option:

  * bias-pull-up
  * bias-pull-down
  * drive-strength
  * input-enable
  * output-enable
  * pinmux-enable

These options define devicetree flags that are converted to SoC flags at
ATMEL_SAM0_PIN_FLAGS().

Properties

Top level properties

These property descriptions apply to “atmel,sam0-pinctrl” nodes themselves. This page also describes child node properties in the following sections.

Node specific properties

Properties not inherited from the base binding file.

(None)

Deprecated node specific properties

Deprecated properties not inherited from the base binding file.

(None)

Base properties

Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “atmel,sam0-pinctrl” compatible.

Name

Type

Details

#address-cells

int

 
number of address cells in reg property

This property is required.

Constant value: 1

#size-cells

int

 
number of size cells in reg property

This property is required.

Constant value: 1

status

string

 
indicates the operational status of a device

Legal values: 'ok', 'okay', 'disabled', 'reserved', 'fail', 'fail-sss'

See Important properties for more information.

compatible

string-array

 
compatible strings

This property is required.

See Important properties for more information.

reg

array

 
register space

See Important properties for more information.

reg-names

string-array

 
name of each register space

interrupts

array

 
interrupts for device

See Important properties for more information.

interrupts-extended

compound

 
extended interrupt specifier for device

interrupt-names

string-array

 
name of each interrupt

interrupt-parent

phandle

 
phandle to interrupt controller node

label

string

 
Human readable string describing the device (used as device_get_binding() argument)

See Important properties for more information.

clocks

phandle-array

 
Clock gate information

clock-names

string-array

 
name of each clock

dmas

phandle-array

 
DMA channels specifiers

dma-names

string-array

 
Provided names of DMA channel specifiers

io-channels

phandle-array

 
IO channels specifiers

io-channel-names

string-array

 
Provided names of IO channel specifiers

mboxes

phandle-array

 
mailbox / IPM channels specifiers

mbox-names

string-array

 
Provided names of mailbox / IPM channel specifiers

wakeup-source

boolean

 
Property to identify that a device can be used as wake up source.

When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.

Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.

power-domain

phandle

 
Power domain the device belongs to.

The device will be notified when the power domain it belongs to is either
suspended or resumed.

Child node properties

Name

Type

Details

atmel,pins

phandle-array

pinmux-enable

boolean

 
Assign pin to an embedded device peripheral

bias-pull-up

boolean

 
enable pull-up resistor

bias-pull-down

boolean

 
enable pull-down resistor

drive-strength

int

 
maximum sink or source current in mA

input-enable

boolean

 
enable input on pin (no effect on output, such as enabling an input
buffer)

output-enable

boolean

 
enable output on a pin without actively driving it (such as enabling
an output buffer)