arch.h

Go to the documentation of this file.

/*
 * Copyright (c) 2019 Intel Corp.
 * SPDX-License-Identifier: Apache-2.0
 */
 
#ifndef ZEPHYR_INCLUDE_ARCH_X86_ARCH_H_
#define ZEPHYR_INCLUDE_ARCH_X86_ARCH_H_
 
#include <zephyr/devicetree.h>
 
/* Changing this value will require manual changes to exception and IDT setup
 * in locore.S for intel64
 */
#define Z_X86_OOPS_VECTOR       32
 
#if !defined(_ASMLANGUAGE)
 
#include <zephyr/sys/sys_io.h>
#include <zephyr/types.h>
#include <stddef.h>
#include <stdbool.h>
#include <zephyr/irq.h>
#include <zephyr/arch/x86/mmustructs.h>
#include <zephyr/arch/x86/thread_stack.h>
#include <zephyr/linker/sections.h>
 
#ifdef __cplusplus
extern "C" {
#endif
 
#ifdef CONFIG_PCIE_MSI
 
struct x86_msi_vector {
        unsigned int irq;
        uint8_t vector;
#ifdef CONFIG_INTEL_VTD_ICTL
        bool remap;
        uint8_t irte;
#endif
};
 
typedef struct x86_msi_vector arch_msi_vector_t;
 
#endif /* CONFIG_PCIE_MSI */
 
static ALWAYS_INLINE void arch_irq_unlock(unsigned int key)
{
        if ((key & 0x00000200U) != 0U) { /* 'IF' bit */
                __asm__ volatile ("sti" ::: "memory");
        }
}
 
static ALWAYS_INLINE void sys_out8(uint8_t data, io_port_t port)
{
        __asm__ volatile("outb %b0, %w1" :: "a"(data), "Nd"(port));
}
 
static ALWAYS_INLINE uint8_t sys_in8(io_port_t port)
{
        uint8_t ret;
 
        __asm__ volatile("inb %w1, %b0" : "=a"(ret) : "Nd"(port));
 
        return ret;
}
 
static ALWAYS_INLINE void sys_out16(uint16_t data, io_port_t port)
{
        __asm__ volatile("outw %w0, %w1" :: "a"(data), "Nd"(port));
}
 
static ALWAYS_INLINE uint16_t sys_in16(io_port_t port)
{
        uint16_t ret;
 
        __asm__ volatile("inw %w1, %w0" : "=a"(ret) : "Nd"(port));
 
        return ret;
}
 
static ALWAYS_INLINE void sys_out32(uint32_t data, io_port_t port)
{
        __asm__ volatile("outl %0, %w1" :: "a"(data), "Nd"(port));
}
 
static ALWAYS_INLINE uint32_t sys_in32(io_port_t port)
{
        uint32_t ret;
 
        __asm__ volatile("inl %w1, %0" : "=a"(ret) : "Nd"(port));
 
        return ret;
}
 
static ALWAYS_INLINE void sys_write8(uint8_t data, mm_reg_t addr)
{
        __asm__ volatile("movb %0, %1"
                         :
                         : "q"(data), "m" (*(volatile uint8_t *)(uintptr_t) addr)
                         : "memory");
}
 
static ALWAYS_INLINE uint8_t sys_read8(mm_reg_t addr)
{
        uint8_t ret;
 
        __asm__ volatile("movb %1, %0"
                         : "=q"(ret)
                         : "m" (*(volatile uint8_t *)(uintptr_t) addr)
                         : "memory");
 
        return ret;
}
 
static ALWAYS_INLINE void sys_write16(uint16_t data, mm_reg_t addr)
{
        __asm__ volatile("movw %0, %1"
                         :
                         : "r"(data), "m" (*(volatile uint16_t *)(uintptr_t) addr)
                         : "memory");
}
 
static ALWAYS_INLINE uint16_t sys_read16(mm_reg_t addr)
{
        uint16_t ret;
 
        __asm__ volatile("movw %1, %0"
                         : "=r"(ret)
                         : "m" (*(volatile uint16_t *)(uintptr_t) addr)
                         : "memory");
 
        return ret;
}
 
static ALWAYS_INLINE void sys_write32(uint32_t data, mm_reg_t addr)
{
        __asm__ volatile("movl %0, %1"
                         :
                         : "r"(data), "m" (*(volatile uint32_t *)(uintptr_t) addr)
                         : "memory");
}
 
static ALWAYS_INLINE uint32_t sys_read32(mm_reg_t addr)
{
        uint32_t ret;
 
        __asm__ volatile("movl %1, %0"
                         : "=r"(ret)
                         : "m" (*(volatile uint32_t *)(uintptr_t) addr)
                         : "memory");
 
        return ret;
}
 
static ALWAYS_INLINE void sys_set_bit(mem_addr_t addr, unsigned int bit)
{
        __asm__ volatile("btsl %1, %0"
                         : "+m" (*(volatile uint8_t *) (addr))
                         : "Ir" (bit)
                         : "memory");
}
 
static ALWAYS_INLINE void sys_clear_bit(mem_addr_t addr, unsigned int bit)
{
        __asm__ volatile("btrl %1, %0"
                         : "+m" (*(volatile uint8_t *) (addr))
                         : "Ir" (bit));
}
 
static ALWAYS_INLINE int sys_test_bit(mem_addr_t addr, unsigned int bit)
{
        int ret;
 
        __asm__ volatile("btl %2, %1;"
                         "sbb %0, %0"
                         : "=r" (ret), "+m" (*(volatile uint8_t *) (addr))
                         : "Ir" (bit));
 
        return ret;
}
 
static ALWAYS_INLINE int sys_test_and_set_bit(mem_addr_t addr,
                                              unsigned int bit)
{
        int ret;
 
        __asm__ volatile("btsl %2, %1;"
                         "sbb %0, %0"
                         : "=r" (ret), "+m" (*(volatile uint8_t *) (addr))
                         : "Ir" (bit));
 
        return ret;
}
 
static ALWAYS_INLINE int sys_test_and_clear_bit(mem_addr_t addr,
                                                unsigned int bit)
{
        int ret;
 
        __asm__ volatile("btrl %2, %1;"
                         "sbb %0, %0"
                         : "=r" (ret), "+m" (*(volatile uint8_t *) (addr))
                         : "Ir" (bit));
 
        return ret;
}
 
#define sys_bitfield_set_bit sys_set_bit
#define sys_bitfield_clear_bit sys_clear_bit
#define sys_bitfield_test_bit sys_test_bit
#define sys_bitfield_test_and_set_bit sys_test_and_set_bit
#define sys_bitfield_test_and_clear_bit sys_test_and_clear_bit
 
/*
 * Map of IRQ numbers to their assigned vectors. On IA32, this is generated
 * at build time and defined via the linker script. On Intel64, it's an array.
 */
 
extern unsigned char _irq_to_interrupt_vector[];
 
#define Z_IRQ_TO_INTERRUPT_VECTOR(irq) \
        ((unsigned int) _irq_to_interrupt_vector[irq])
 
 
#endif /* _ASMLANGUAGE */
 
#ifdef __cplusplus
}
#endif
 
#include <zephyr/drivers/interrupt_controller/sysapic.h>
 
#ifdef CONFIG_X86_64
#include <zephyr/arch/x86/intel64/arch.h>
#else
#include <zephyr/arch/x86/ia32/arch.h>
#endif
 
#include <zephyr/arch/common/ffs.h>
 
#ifdef __cplusplus
extern "C" {
#endif
 
#ifndef _ASMLANGUAGE
 
extern void arch_irq_enable(unsigned int irq);
extern void arch_irq_disable(unsigned int irq);
 
extern uint32_t sys_clock_cycle_get_32(void);
 
__pinned_func
static inline uint32_t arch_k_cycle_get_32(void)
{
        return sys_clock_cycle_get_32();
}
 
extern uint64_t sys_clock_cycle_get_64(void);
 
__pinned_func
static inline uint64_t arch_k_cycle_get_64(void)
{
        return sys_clock_cycle_get_64();
}
 
static ALWAYS_INLINE bool arch_irq_unlocked(unsigned int key)
{
        return (key & 0x200) != 0;
}
 
static ALWAYS_INLINE uint32_t z_do_read_cpu_timestamp32(void)
{
        uint32_t rv;
 
        __asm__ volatile("rdtsc" : "=a" (rv) : : "%edx");
 
        return rv;
}
 
__pinned_func
static inline uint64_t z_tsc_read(void)
{
        union {
                struct  {
                        uint32_t lo;
                        uint32_t hi;
                };
                uint64_t  value;
        }  rv;
 
#ifdef CONFIG_X86_64
        /*
         * According to Intel 64 and IA-32 Architectures Software
         * Developer’s Manual, volume 3, chapter 8.2.5, LFENCE provides
         * a more efficient method of controlling memory ordering than
         * the CPUID instruction. So use LFENCE here, as all 64-bit
         * CPUs have LFENCE.
         */
        __asm__ volatile ("lfence");
#else
        /* rdtsc & cpuid clobbers eax, ebx, ecx and edx registers */
        __asm__ volatile (/* serialize */
                "xorl %%eax,%%eax;"
                "cpuid"
                :
                :
                : "%eax", "%ebx", "%ecx", "%edx"
                );
#endif
 
#ifdef CONFIG_X86_64
        /*
         * We cannot use "=A", since this would use %rax on x86_64 and
         * return only the lower 32bits of the TSC
         */
        __asm__ volatile ("rdtsc" : "=a" (rv.lo), "=d" (rv.hi));
#else
        /* "=A" means that value is in eax:edx pair. */
        __asm__ volatile ("rdtsc" : "=A" (rv.value));
#endif
 
        return rv.value;
}
 
static ALWAYS_INLINE void arch_nop(void)
{
        __asm__ volatile("nop");
}
 
#endif /* _ASMLANGUAGE */
 
#ifdef __cplusplus
}
#endif
 
#endif /* ZEPHYR_INCLUDE_ARCH_X86_ARCH_H_ */