LED Blinky

Overview

See Blinky for the original description.

Requirements

The TiaC Magpie board have two “User LEDs” connected via GPIO pins. The first LED is configured using the led0 devicetree alias.

Building and Running

Build and flash LED Blinky as follows:

west build -b tiac_magpie -p -d build/led_blinky-tiac_magpie zephyr/samples/basic/blinky
west flash -d build/led_blinky-tiac_magpie

After flashing, the first “User LED” starts to blink. LED Blinky does not print to the console.