ST Nucleo L496ZG

Overview

This is a set of Bridle’s extension to the original Zephyr upstream board Nucleo L496ZG with some adaptions and improvement on Devicetree level.

List of extensions

  • fix the wrong Arduino UNO R3 specific interface labels:

    • arduino_serial: &usart3 {};

Note

On Nucleo L496ZG pin D0 (RX) and D1 (TX) are connected to USART3 and not to LPUART1 as set in the origin upstream Devicetree. For more details, see schematic MB1312-A03 on sheet 5 and manual UM2179 table 11 on page 40.