XIAO RP2040 (BBE)

Overview

This is a set of Bridle’s board extensions (BBE) to the original Zephyr upstream board XIAO RP2040 with some adaptions and improvement on Twister, Kconfig and Devicetree level.

List of extensions

Board YAML

  • add the missing features that this board supports and that Twister tests might depends on:

    • usbd

    • xiao_adc

Kconfig

  • deactivate self powered USB explicitly and set the maximum of electrical current consumption to 500㎃:

    XIAO RP2040

    Kconfig.defconfig
    config CDC_ACM_SERIAL_SELF_POWERED
    	default n
    	depends on USB_DEVICE_STACK_NEXT && USBD_CDC_ACM_CLASS
    
    config CDC_ACM_SERIAL_MAX_POWER
    	default 250 if BOARD_XIAO_RP2040	# 500mA
    	depends on USB_DEVICE_STACK_NEXT && USBD_CDC_ACM_CLASS
    
  • change log level only in case of use the native USB device port raspberrypi,pico-usbd with CDC-ACM UART zephyr,cdc-acm-uart as Zephyr console:

    XIAO RP2040

    Kconfig.defconfig
    # Workaround for not being able to have commas in macro arguments
    DT_CHOSEN_Z_CONSOLE := zephyr,console
    DT_COMPAT_Z_CDC_ACM_UART := zephyr,cdc-acm-uart
    DT_COMPAT_RPIPICO_USB := raspberrypi,pico-usbd
    
    # Macros to shorten Kconfig expressions
    DT_CHOSEN_CONSOLE_NODE := $(dt_chosen_path,$(DT_CHOSEN_Z_CONSOLE))
    DT_CHOSEN_CONSOLE_PARENT := $(dt_node_parent,$(DT_CHOSEN_CONSOLE_NODE))
    
    if BOARD_XIAO_RP2040 && \
    	$(dt_chosen_enabled,$(DT_CHOSEN_Z_CONSOLE)) && \
    	$(dt_compat_on_bus,$(DT_COMPAT_Z_CDC_ACM_UART),usb) && \
    	$(dt_node_has_compat,$(DT_CHOSEN_CONSOLE_PARENT),$(DT_COMPAT_RPIPICO_USB))
    
    # Logger cannot use itself to log
    choice USBD_CDC_ACM_LOG_LEVEL_CHOICE
    	default USBD_CDC_ACM_LOG_LEVEL_OFF
    	depends on LOG && USB_DEVICE_STACK_NEXT && USBD_CDC_ACM_CLASS
    endchoice
    
    # Set USB log level to error only
    choice USBD_LOG_LEVEL_CHOICE
    	default USBD_LOG_LEVEL_ERR
    	depends on LOG && USB_DEVICE_STACK_NEXT && USBD_CDC_ACM_CLASS
    endchoice
    
    # Set UDC driver log level to error only
    choice UDC_DRIVER_LOG_LEVEL_CHOICE
    	default UDC_DRIVER_LOG_LEVEL_ERR
    	depends on LOG && USB_DEVICE_STACK_NEXT && USBD_CDC_ACM_CLASS
    endchoice
    
    endif # zephyr,cdc-acm-uart
    

Devicetree

  • set default entries for model and compatible of the boards:

    XIAO RP2040

    xiao_rp2040_rp2040_bbe.dts
    / {
    	model = "Seeed Studio XIAO RP2040 @ UART Concole (BBE)";
    	compatible = "seeed,xiao-rp2040",
    		     "seeed,xiao-rp2040-bbe",
    		     "seeed,xiao-rp2040-uartcons",
    		     "seeed,xiao-rp2040-uartcons-bbe";
    
    };