Grove Sensor Shields
Bridle supports a couple of different Sensor shields carrying Seeed Studio Grove System [9] connectors. Please download and read through the Preface - Getting Started [11] and Introduction to Grove [12] before use the product. Also have a look on the SiPEED Wiki page about the Grove standard interfaces [13].
Seeed Studio Sensor Shields
Variants and Versions
Here find the comparison between various variants and versions of Seeed Studio Sensor Shields:
Parameter |
BME280 V1.0 |
BMP280 V1.0 |
DPS310 V1.0 |
|---|---|---|---|
Release Date |
Mar 2016 |
Mar 2016 |
Aug 2019 |
Operation Voltage |
3.3V or 5V |
3.3V or 5V |
3.3V or 5V |
Temperature Range |
-40℃ to +85℃ |
-40℃ to +85℃ |
-40℃ to +85℃ |
Humidity Range |
0 to 100% |
–––––––––––––– |
–––––––––––––––––––– |
Pressure Range |
300 to 1100 ㍱ |
300 to 1100 ㍱ |
300 to 1200 ㍱ |
Pressure Precision |
–––––––––––––– |
–––––––––––––– |
± 0.002 ㍱ / ±0.02 m |
Pressure Accuracy (abs.) |
± 1 ㍱ / ±8 m |
± 1 ㍱ / ±8 m |
± 1 ㍱ / ±8 m |
Pressure Accuracy (rel.) |
± 0.12 ㍱ |
± 0.12 ㍱ |
± 0.06 ㍱ / ±0.5 m |
Pressure Resolution |
0.18 ㎩ |
0.18 ㎩ |
0.06 ㎩ |
Grove Connectors |
1 |
1 |
1 |
Digital Ports |
|||
Analog Ports |
|||
UART Ports |
|||
I2C Ports |
1 (Grove) |
1 (Grove) |
1 (Grove) |
SPI Ports |
1 |
1 |
1 |
Utilization
Requirements
This shield can only be used with a development board or shield that provides
a configuration for Grove System [9] connectors with Grove I2C Layout [10]
and defines a device tree phandle grove_i2c.
Programming
Set -DSHIELD=grove_sens_X when you invoke west build, wherein X
corresponds to the exact sensor type. For example:
Grove Base Shield V2 on MIMXRT1060-EVK for Grove BME280 Sensor:
west build -b mimxrt1060_evk@B/mimxrt1062/qspi -p --shield "seeed_grove_base_v2 grove_sens_bme280" -d build/helloshell-seeed_grove_base_v2-grove_sens_bme280 bridle/samples/helloshell west flash -d build/helloshell-seeed_grove_base_v2-grove_sens_bme280
Grove Base Shield V1.3 or Grove Base Shield V1.2 on MIMXRT1060-EVK for Grove BMP280 Sensor:
west build -b mimxrt1060_evk@B/mimxrt1062/qspi -p --shield "seeed_grove_base_v1 grove_sens_bmp280" -d build/helloshell-seeed_grove_base_v1-grove_sens_bmp280 bridle/samples/helloshell west flash -d build/helloshell-seeed_grove_base_v1-grove_sens_bmp280